Access Violations Occur in the Web Proxy Service If an Impersonation Failure Occurs (318319)

RESOLUTION

The installation of ISA 2000 Service Pack 1 is required prior to applying the following fix.

For additional information about how to obtain Service Pack 1, click the article number below to view the article in the Microsoft Knowledge Base: A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next that contains this hotfix.

To resolve this problem immediately, contact Microsoft Product Support Services to obtain the fix. For a complete list of Microsoft Product Support Services phone numbers and information about support costs, visit the following Microsoft Web site:NOTE: In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The typical support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

The English version of this fix should have the following file attributes or later:

   Date         Time     Version        Size    File name
   ------------------------------------------------------
   27-Mar-2002  14:10    3.0.1200.170   383,760 W3proxy.exe
				

After installing this fix, this access violation should no longer occur; however, the impersonation failure may still occur and errors that are similar to the following ones may be displayed in the browser of the authenticating user:

For a Web Proxy request: For a Web Publishing request: The impersonation failure of the user occurs most likely because the CrashOnAuditFail registry value is set to 0x2.

The CrashOnAuditFail registry value is a security measure in the operating system. If this registry value is set to 0x1 (the default value is 0x0), it crashes the operating system if the system fails to write to the Security event log. Typically this happens if the Security event log is full and it does not allow itself to be overwritten. Before it crashes the operating system, it also changes the value of the CrashOnAuditFail registry value from 0x1 to 0x2 and when the value is set to 0x2, only local administrators can log on to the system. This behavior occurs so that administrators can store and clear the Security event log so that new, auditable actions can be recorded before any users can re-access the system. In addition, the administrator needs to manually reset the CrashOnAuditFail registry value to the original value.

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To resolve the impersonation failure, manually reset the CrashOnAuditFail registry value:

1. If the Security event log is full, make sure it is stored, and then clear it.
2. In Registry Editor, locate the following key:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa

3. Delete and replace the CrashOnAuditFail registry value, with a REG_DWORD data type and a value of 0x1.
   
   You need to delete and then re-create the value as a REG_DWORD data type because the operating system may change it from a REG_DWORD to a REG_NONE data type when the value is changed from 0x1 to 0x2 during when the operating system crashes.
4. Restart the computer.

NOTE: Even though you reset the value to 0x1, it continues to be changed to 0x2 when the operating system fails to write to the Security event log, which requires the same resolution procedure. Therefore, if the CrashOnAuditFail security measure is required, closely monitor the system so that you can reset it to its original state as soon as possible to avoid interruption to the system users.

To disable the CrashOnAuditFail security feature, change the CrashOnAuditFail registry value to 0x0 (the default value), and then restart the computer; however, Domain Policies, a Local Security Policy or security templates can reset the CrashOnAuditFail feature, so continue to monitor the system.

For additional information about the CrashOnAuditFail registry value, click the article numbers below to view the articles in the Microsoft Knowledge Base: