You cannot display and hide specific Pushpin sets in Streets and Trips and in MapPoint (315110)
The information in this article applies to:
- Microsoft Autoroute 2006 English (United Kingdom)
- Microsoft MapPoint 2006 Standard Edition
- Microsoft MapPoint 2004 North American Maps
- Microsoft MapPoint 2002
- Microsoft MapPoint 2001
- Microsoft Streets & Trips 2006
- Microsoft Streets & Trips 2005
- Microsoft Streets & Trips 2004
- Microsoft Streets and Trips 2003
- Microsoft Streets & Trips 2002 1.0
- Microsoft Streets and Trips 2001
This article was previously published under Q315110 SYMPTOMS In Microsoft Streets and Trips and in Microsoft MapPoint, you cannot select a
specific Pushpin set from a group of sets and then display it on the map. You
can do this in Microsoft Streets and Trips 2000.CAUSE This behavior occurs because of a change in the way that
Pushpin sets are handled in Streets and Trips and in MapPoint.
Pushpin sets in
Streets and Trips 2000 are saved as .stp files, and they are separate from the
map file. In other versions of Streets and Trips, Pushpin sets are saved to the map file.
They are components of the map and cannot be separated from it. This behavior
is by design. WORKAROUND To work around this behavior, use one of the following
methods. Method 1: Create a Different Map for Each Pushpin Set Create a different map for each set of Pushpins that you want to
use. To do this, follow these steps:
- Start Streets and Trips or MapPoint.
- Click New on the File
menu, double-click New North American Map, and then click
OK.
A new map with the default map view is
displayed in the map pane. - Create the Pushpins that you want for your new map. To do
this, use any of the following methods:
- Use the Import Data Wizard to import a specific list of
addresses from another program such as Microsoft Outlook, Microsoft Excel, or
Microsoft Access to your map. To start the Import Data Wizard, click
Import Data on the File menu.
- Use the Import Data Wizard to import a Streets and
Trips 2000 Pushpin set to your map. To start the Import Data Wizard, click
Import Data on the File menu.
- Create the Pushpin set. To do this, follow these steps:
- To create a new Pushpin, click
Pushpin on the Drawing toolbar.
- Click the exact location on the map where you want
to place the Pushpin.
- In the gray bar of the text balloon, double-click
Untitled, and then type a title for your Pushpin.
- In the white bar of the text balloon, type the text
that you want to add to the Pushpin note (if any).
- Click X in the upper-right corner
of the text balloon to close it.
- Repeat steps a through e to create the Pushpins
that you want to display on the map.
The Pushpins that you create are placed in the My Pushpins set by default.
- Click Save on the File
menu.
- In the Save As dialog box that appears,
specify a name and location where you want to save your map, and then click
Save.
Method 2: Create a Master Map That Contains All Pushpins Create one "master" map that contains all of the Pushpins that
you want to use, and then group the Pushpins into Pushpin sets. When you want
to view a specific set of Pushpins, open the map, remove the Pushpin sets that
you do not want to display on this map, and then save the map with a new name.
To do this, follow these steps. Create the Master Map- Start Streets & Trips or MapPoint.
- Create the Pushpins that you want for your master map. To
do this, use any of the following methods:
- Use the Import Data Wizard to import addresses from
another program such as Microsoft Outlook, Microsoft Excel, or Microsoft Access
to your map. To start the Import Data Wizard, click Import
Data on the File menu.
- Use the Import Data Wizard to import a Streets and
Trips 2000 Pushpin set to your map. To start the Import Data Wizard, click
Import Data on the File menu.
- Create the Pushpin set. To do this, follow these steps:
- To create a new Pushpin, click
Pushpin on the Drawing toolbar.
- Click the exact location on the map where you want
to place the Pushpin.
- In the gray bar of the text balloon, double-click
Untitled, and then type a title for your Pushpin.
- In the white bar of the text balloon, type the text
that you want to add (if any) to the Pushpin note.
- Click X in the upper-right corner
of the text balloon to close it.
- Repeat steps a through e to create the Pushpins
that you want to display on the map.
The Pushpins that you create are placed in the My Pushpins set by default.
- Group the Pushpins into the Pushpin sets that you want.
Note Pushpins that are imported from external files can only be moved
into empty Pushpin sets or sets that contain Pushpins from the same source.
On the map, right-click the Pushpin that you want to move, click
Properties, and then do any of the following:
- To move a pushpin to an existing Pushpin set, click the
data set to which you want to move the Pushpin under Data set
name, and then click OK.
- To move a Pushpin to a new data set, click New
Data Set, then type a name for the new data set, and then click
OK two times.
- Click Save on the File
menu.
- In the Save As dialog box that appears,
specify a name and location where you want to save your master map, and then
click Save.
Create New Maps Based on the Master Map When you want to view a particular pushpin set, open the master
map, and then remove the Pushpin sets that you do not want to display on the
map. To do this, follow these steps:
- Start Streets and Trips or MapPoint, and then open the master map that you
created.
- Under Pushpins, in the Legend and
Overview pane, right-click the Pushpin set (or sets) that you want to
remove, and then click Delete.
- Click Save on the File
menu.
- In the Save As dialog box that appears,
specify a name and location where you want to save your new map, and then click
Save.
Method 3: Import a Specific List of Addresses to Your Map If you are importing addresses to your map from another program
such as Excel, create separate worksheets that contain a specific list of
addresses for each Pushpin set that you want to create. You can then use the
Import Data Wizard to import the list of addresses that you want to your map.
To start the Import Data Wizard, click Import Data on the
File menu. MORE INFORMATION For more information about how to create and work with
pushpins and pushpin sets, click Microsoft Streets & Trips
Help on the Help menu, click the Answer
Wizard tab, type pushpin, and then click
Search to view the topics that are returned.
Modification Type: | Major | Last Reviewed: | 4/26/2006 |
---|
Keywords: | kbprb KB315110 |
---|
|