INFO: Issues Migrating from DAO/Jet to ADO/Jet (225048)



The information in this article applies to:

  • Microsoft Visual Basic Professional Edition for Windows 5.0
  • Microsoft Visual Basic Professional Edition for Windows 6.0
  • Microsoft Visual Basic Enterprise Edition for Windows 5.0
  • Microsoft Visual Basic Enterprise Edition for Windows 6.0
  • ActiveX Data Objects (ADO) 2.0
  • ActiveX Data Objects (ADO) 2.01
  • ActiveX Data Objects (ADO) 2.1
  • ActiveX Data Objects (ADO) 2.5
  • ActiveX Data Objects (ADO) 2.6
  • ActiveX Data Objects (ADO) 2.7

This article was previously published under Q225048

SUMMARY

When migrating an application from using DAO and the Jet database engine to using ADO and the Jet database engine, there are a number of issues that need to be taken into account before determining the feasibility of such a transition.

MORE INFORMATION

DAO and ADO were designed to solve two different problems. As such, they expose two different object models and different methods of manipulating the underlying data engines. These differences could mean that you have to make some extensive changes when migrating your application from DAO to ADO.

The DAO object model is designed specifically for the Microsoft Jet database engine. Jet itself incorporates ISAM and ODBC connectivity and makes the back-end providers look as much like the native Jet engine as possible, though this comes at the expense of performance. DAO also has an ODBCDirect mode that allows it to host RDO objects and access ODBC datasources in a very efficient manner.

The ADO object model was designed for OLE DB providers and is a much simpler and more flexible object model than DAO. However, its architectural design poses some problems when using the Microsoft Jet OLE DB provider, and it is more limited than DAO in Jet functionality it supports.

This article outlines several issues you need to consider when making the decision whether to migrate your applications from DAO to ADO.

Provider: OLE DB Provider for Jet 3.51 vs 4.0

The first decision is which OLE DB provider to use. The OLE DB provider for Jet 3.51 uses the same version of Jet as Access 97 and Visual Basic 5.0 and 6.0, but it has limited functionality. The OLE DB provider for Jet 4.0 has more functionality, but its native database format is incompatible with Access 97, though it can read and write to older database formats through an ISAM driver.

Cursors: Client-Side vs Server-Side

The next decision you have to make in ADO, as in ODBC and RDO, is whether to use client-side cursors or server-side cursors.

If you choose client-side cursors, the Client Cursor engine requests the records from Microsoft Jet and buffers them in a temporary file on your local machine. This will allow your application to have standard ADO functionality, such as disconnected and/or saved recordsets and batch updates. However, you will not be able to see new records added to any table using an Autonumber column as the Primary key unless you Requery the records. You will also not be able to see changes other users make until you requery the recordset.

For more information about this topic, please see the following article in the Microsoft Knowledge Base:

190370 PRB: AutoNumber Field Is Not Incremented When Using ADO

The OLE DB Provider for Microsoft Jet 3.51 does not return enough schema information for some recordsets to be updated when using client-side cursors.

For more information about this topic, please see the following article in the Microsoft Knowledge Base:

190108 PRB: Error Updating adUseClient Cursor Based on MDB Query

When using server-side cursors that are provided by the Microsoft Jet OLE DB provider and Rowset Helper, functionality will be more limited. However, performance of certain operations, such as scrolling through records in a recordset, will be faster, and you will be able to see records added to tables that contain Autonumber fields without having to requery the recordset.

Multiple Providers

As stated at the beginning of the article, DAO and Jet try to make all providers appear the same to the programmer. The drawback is performance. The benefit is fewer special case decisions in code. ADO, however, exposes the native functionality of each provider. This can mean more efficient programs if they are coded against a single provider, but if writing code to access multiple providers, then you will have to use client-side cursors to minimize differences between them, or you will have to devote more of your application to special case scenarios where two or more providers expose different functionality.

Limited Functionality of ADO and the OLE DB Provider for Jet

The OLE DB Provider for Jet 3.51 is a limited provider. It was intended to provide a thread-safe method of using Microsoft Jet with Microsoft's Internet Information Server.

For more information about this topic, please see the following article in the Microsoft Knowledge Base:

222135 INFO: Using Microsoft Jet with IIS

It does not expose the full capabilities of the Microsoft Jet database engine. It provides the ability to open recordsets against tables, non-parameterized queries, and parameterized or non-parameterized SELECT statements. It also allows the execution of SQL commands, but not stored Microsoft Jet action queries. It does not allow access to ISAM data sources.

The OLE DB Provider for Jet 4.0 exposes most of the Microsoft Jet functionality, but not all of it. In addition to the ADO type library, you must include references in your project to the ADOX and Jet and Replication Objects type libraries to take advantage of functionality outside the core ADO objects. This mainly falls into the category of manipulating Access-specific objects and some of the other issues noted below.

Limited Functionality of DAO

  • DAO 3.51 cannot use the Microsoft Jet 4.0 database engine, but it does have full control over the Microsoft Jet 3.51 database engine.
  • DAO 3.6 provides DAO 3.51 level of control over Microsoft Jet 4.0, but does not expose any new functionality available in Microsoft Jet 4.0.

Performance

DAO makes much more efficient use to the Microsoft Jet database engine than ADO and many operations are faster under DAO, sometimes up to 5 or 10 times faster, such as use of Batch updates. Another issue is that the calls made to retrieve schema information are inefficient when applied against Jet. This results in queries and updates against tables with a large number of columns being 30 percent to 80 percent slower than the equivalent query using DAO. One example of inefficient usage of Jet by ADO is illustrated in the next section on Connection Issues.

Connection Issues

Microsoft Jet can host multiple independent sessions within the same process. Each session has overhead and a separate read cache. A session in DAO is represented by the DBEngine object. By default, all DAO objects you create and all DAO Data controls in Visual Basic use the same Jet session.

In OLE DB, a Jet session is represented by the Data Source object. Multiple connections can be opened against a single Data Source object.

In ADO, the OLE DB object model is somewhat simplified: An ADO Connection object consists of an OLE DB Data Source object and an OLE DB Connection object. This means that in ADO, every Connection object and ADO Data control use a separate Jet session.

This has important ramifications when migrating your application from DAO to ADO. First, Microsoft Jet can only handle a limited number of sessions. If your application uses a large number of ADO Data controls, Jet may run out of resources. In addition, Jet's read buffer has a five-second time-out, so changes made on one connection will not be visible on another for five seconds. In DAO, this was not an issue, because all objects were using the same buffer. The following Knowledge Base article provides more information on this topic, and how to share connections between data controls to eliminate the problems caused by multiple Jet sessions:

216925 PRB: Single-User Concurrency Problems With ADO and Jet

A second method of improving concurrency is to use the RefreshCache method of JetEngine object. This object is exposed via the Microsoft Jet and Replication Objects 2.1 Library, available starting with ADO 2.1 Sp1 GA. ADO is downloadable from:

http://msdn.microsoft.com/dataaccess

Redistribution

When using DAO, you have a much smaller number of files that you must install on the client machine. The Visual Basic Setup Wizard (Visual Basic 5.0 and earlier) or the Package and Deployment Wizard (Visual Basic 6.0) handles this for you. With ADO, you have to redistribute all of ADO and OLE DB, including ODBC, and some default drivers other than Microsoft Jet.

Wild Card Characters

The query wild-card characters are different in DAO than in ADO. DAO exposes the following characters for use with the SQL LIKE operator:

CharacterFunction
*Match any string
?Match any character
#Match any digit
[a-cf]Match any of 'a' through 'c' or 'f'
[~a-c]Match anything but of 'a' through 'c'

ADO exposes the following ANSI wildcard characters:

CharacterFunction
%Match any string
_Match any character

Wildcards and Stored Queries

If you have a stored QueryDef in an MDB file, created through Access or DAO, that uses wildcard characters, it will not return any records if run under ADO. The OLEDB provider for Jet recompiles the SQL and tells the query engine to use the ANSI wildcard characters (see table above).

If you create a QueryDef in a Jet 4.0 database using the ADO CREATE PROCEDURE or CREATE VIEW statements and ANSI wildcards, the queries will not run correctly under DAO 3.6. More information on ANSI query issues is in the "Access 2000 and Legacy Application Compatibility" section later in this article.

Find vs FindFirst

In ADO, the Find method has a couple of limitations:
  • Neither the 3.51 nor 4.0 versions of the OLE DB provider for Microsoft Jet implement the Find method natively, so the Rowset Helper is used. The Rowset Helper implements the Find method by stepping through the records sequentially. To avoid this performance penalty, you should use a SELECT statement with a WHERE condition to return just the record(s) you need and, if this is not feasible, then use client-side cursors and the Filter method.
  • Unlike FindFirst or the ADO Filter method, which allow complex search criteria, the Find method allows only a single comparison with limited syntax:

    fieldname operator literal

OLE Container Control

Many databases, including the SQL Server 7 Northwind database, contain pictures and other objects saved by Microsoft Access. In Visual Basic, you can see the pictures by binding the OLE Container control to the DAO Data control. However, the OLE Container control is not compatible with the ADO Data control and there is no way to access these pictures and display them using ADO. The OLE Container control cannot be used unbound because GetChunk does not retrieve the data in a format compatible with the ReadFromFile method.

Security

When using ADOX to create users in a secure Jet environment, you cannot specify the PID. This means that if the SYSTEM.MDW file is deleted you will not be able to recreate the accounts from scratch, but must rely on a backup SYSTEM.MDW file.

Access 2000 and Legacy Application Compatibility

There are three main compatibility issues:

  • The first is that using the Jet 4.0 database format means that legacy applications, such as Access 95 and Access 97, and Visual Basic 4.0, 5.0, and 6.0 applications that use the DAO Data control, are all hard-coded to use the Jet 3.x database format will not be able read Jet 4.0 data.
  • The second issue is that stored queries created by ADO are not visible to Access 2000. The reason for this is a change in the Jet 4.0 query processor to make it more ANSI compliant, including adding new SQL commands. Access 2000 does not even display these queries in order to avoid confusing users. However, they can be seen and executed via DAO and ADO. They can also be referenced in Form and Report RecordSource properties and in SQL statements; you will have to type the name in manually as the builder will not display the name. The Microsoft OLE DB provider for Jet 4.0 always sets the ANSI flag to a non-NULL value. DAO always sets this flag to NULL.
  • The third issue is that Jet 4.0 drops support for the FoxPro IISAM. Any FoxPro tables must be accessed through the FoxPro ODBC driver. If your Jet database uses linked FoxPro tables, and you convert to Jet 4.0, you will have to re-link them to use the FoxPro ODBC driver instead.

Modification Type:MajorLast Reviewed:8/8/2003
Keywords:kbDatabase kbIISAM kbinfo kbJET KB225048 kbAudDeveloper