UserEnv Returns Corrupted Profile for All Failures Including RSL Exceeded (189119)
The information in this article applies to:
- Microsoft Windows NT Server 4.0 Terminal Server Edition
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional
- Microsoft Windows NT Workstation 4.0
- Microsoft Windows NT Server 4.0
This article was previously published under Q189119 SYMPTOMSImportant This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base: 256986 Description of the Microsoft Windows Registry
When you log on to a Windows NT 4.0 computer, you may receive the following
error in the User Environment dialog box:
The operating system was unable to load the locally stored profile. A
new local profile will be created (1009).
The following message may be displayed as well:
Your profile was not successfully loaded, but you have been logged on
with the default system profile. Please correct the problem and log off
(18).
Your profile settings (desktop icons, application settings, and so on) are
reset to the default. If you look in the %SystemRoot%\Profiles folder,
you should see your profile directory has been renamed to
%SystemRoot%\Profiles\Username.bak, and a new default profile has been
stored in %SystemRoot%\Profiles\Username. This is done to allow a user to
log on successfully if the profile has been corrupted or does not load for
some other reason.
If the registry size limit has been exceeded, a system pop-up message
indicating this will be presented to the user during the first logon
attempt when this occurs. The following message will be displayed:
System Process - Low on Registry Quota: Your system is running low on
registry quota. Start the System option in the Control Panel and choose
the Virtual Memory button to increase the registry quota.
During subsequent logon attempts, profile load errors will occur and the
following application events will be logged:
Event ID 1000 userenv RegLoadKey failed with error 1009 for
C:\WINNT\Profiles\username\ntuser.dat
Event ID 1000 userenv The operating system was unable to load the
locally stored profile. A new local profile will be created. (1009)
NOTE: If a user commonly locks the workstation instead of logging off, the
original Registry Size Limit error may have been forgotten or lost from the
event log by the time a subsequent logon attempt occurs and the profile
fails to load. Windows 2000 Terminal Server SP4 clients are not able to connect to the Terminal Server because of the following error messages: Event Type: Error Event Source: Userenv Event ID: 1000 Date: 1/6/2004 Time: 10:33:41 AM User: NT AUTHORITY\SYSTEM Computer: SRV-TS01 Description: RegLoadKey failed. Return value Insufficient system resources exist to complete the requested service. for C:\Documents and Settings\jj35678\ntuser.dat. Event Type: Error Event Source: Userenv Event ID: 1000 Date: 1/6/2004 Time: 10:33:47 AM User: NT AUTHORITY\SYSTEM Computer: SRV-TS01 Description: Windows cannot load your profile. Please increase the registry size and restart the computer. Event Type: Error Event Source: Userenv Event ID: 1000 Date: 1/6/2004 Time: 10:33:48 AM User: NT AUTHORITY\SYSTEM Computer: SRV-TS01 Description: Windows cannot log you on because the profile cannot be loaded. Contact your network administrator. DETAIL - Insufficient system resources exist to complete the requested service. CAUSE
Although the user profile registry keys may fail to load for a number of
reasons, one status code is always returned indicating that the profile is
corrupted. The Registry Size Limit (RSL) may have been exceeded. The RSL is
a user-defined quota that places a maximum upper limit on how large the
registry can grow. When this limit is approached, a message stating this in
the Application Popup dialog box will be presented to the user. Because the
loading of a user profile (stored in Ntuser.dat) consumes Registry Quota,
this may contribute to the exhaustion of this resource.
RESOLUTION
A User Profile does not load if the RSL has been exceeded. This is by
design. To work around this problem, the RSL can be increased to avoid the
restriction. To do this, follow these steps:
- In Control Panel, double-click System.
- On the Performance tab, click Change in the Virtual Memory section.
- In the Virtual Memory dialog box, in the Registry Size section, the
current registry size and the maximum registry size are displayed.
Modify the current RSL in this section.
Microsoft recommends increasing the RSL only enough to accommodate the
current Registry and a small amount of growth. For additional information,
please see the following article in the
Microsoft Knowledge Base:
176083
System Is Running Low on Registry Quota
In Windows NT 4.0, Terminal Server Edition, the RSL is based on paged pool. The maximum size of paged pool is 192 MB. RSL can consume a maximum of 80 percent of paged pool, for a maximum of 153.6 MB. For additional information, click the article number below
to view the article in the Microsoft Knowledge Base:
124594 Understanding and Configuring Registry Size Limit (RSL)
Windows NT 4.0
If the profile has been renamed to Username.bak as a result of the
RSL being exceeded, it is possible to restore the original profile
settings.
- Log on to the computer as Administrator.
- Rename or delete the %SystemRoot%\Profiles\Username profile folder.
- Rename the %SystemRoot%\Profiles\Username.bak profile folder to Username.
- Log off as Administrator and log on as Username.
Windows 2000
Windows 2000 includes a UserEnv enhancement so that the user profile is not
deleted if or when the profile is not corrupt. A pop-up message is provided indicating
insufficient resources. The user is then logged off if the user does not have
local administrative privileges or the user is logged on when administrative
privileges are identified. The administrator can then increase the registry
size limit and log on again. The user profile used prior to the problem is
still being saved on the local computer unless it has just been copied. Note A restart is required after RSL has been increased either by using Control Panel or by editing the registry, because this change does not happen dynamically and you may still experience the following event: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1000 Date: DateTime: TimeUser: NT AUTHORITY\SYSTEM Computer: ComputerNameDescription: RegLoadKey failed. Return value: Insufficient system resources exist to complete the requested service for C:\Documents and Settings\ntuser.dat.
Windows 2000 Terminal Server SP4 clientsWarning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. - Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management - Implement the following registry settings:
PoolUsageMaximum=dword:00000030 PagedPoolSize=dword:ffffffff - Restart the computer.
To try to reduce the size of the registry on Windows 2000 Professional-based computers that are affected: - Click Start, click Run, type ntbackup, and then click OK. Click Emergency Repair Disk.
- When the following message comes up: Insert a blank, formatted floppy disk into drive A: and click Ok. Also backup the registry to the repair directory. This backup can be used to help recover your system if the registry is damaged. Ok
When you click OK, you can disregard the following error message: The operation failed. The drive is not ready, or the diskette is not inserted properly. - Create a new Regback folder in c:\winnt\repair. Close Windows NT Backup, and then start the Registry Editor.
- Click \HKEY_LOCAL_MACHINE, and then click Load Hive on the File menu.
- Open the c:\winnt\repair\regback folder, click Software, and then click Open.
- In the Key Name box, type software.good, and then click OK.
- On the Registry menu, click Save Key.
- Restart your computer with the Windows 2000 CD-ROM in your CD-ROM drive so you can so you can boot from the Windows 2000 CD.
- Start the Recovery Console, and then type the following commands. Press ENTER after each command:
cd\winnt\system32\config rename software Software.bad rename Software.good software - Restart your computer.
For additional information about the Recovery Console, click the following article number to view the article in the Microsoft Knowledge Base:
229716
Description of the Windows 2000 Recovery Console
To resolve this problem, obtain the latest service pack for Windows NT 4.0 or Windows NT Server 4.0, Terminal Server Edition. For additional information, click the following article number to view the article in the
Microsoft Knowledge Base:
152734 How to Obtain the Latest Windows NT 4.0 Service Pack
STATUSMicrosoft has confirmed that this is a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4.
Modification Type: | Minor | Last Reviewed: | 9/23/2005 |
---|
Keywords: | kbHotfixServer kbQFE kbbug kbfix kbQFE KB189119 |
---|
|