MORE INFORMATION
Error 1
Incorrect function.
Error 2
The system cannot find the file specified.
Error 3
The system cannot find the path specified.
Error 4
The system cannot open the file.
Error 5
Access is denied.
Error 6
The handle is invalid.
Error 7
The storage control blocks were destroyed.
Error 8
Not enough storage is available to process this command.
Error 9
The storage control block address is invalid.
Error 10
The environment is incorrect.
Error 11
An attempt was made to load a program with an incorrect format.
Error 12
The access code is invalid.
Error 13
The data is invalid.
Error 14
Not enough storage is available to complete this operation.
Error 15
The system cannot find the drive specified.
Error 16
The directory cannot be removed.
Error 17
The system cannot move the file to a different disk drive.
Error 18
There are no more files.
Error 19
The media is write protected.
Error 20
The system cannot find the device specified.
Error 21
The device is not ready.
Error 22
The device does not recognize the command.
Error 23
Data error (cyclic redundancy check)
Error 24
The program issued a command but the command length is incorrect.
Error 25
The drive cannot locate a specific area or track on the disk.
Error 26
The specified disk or diskette cannot be accessed.
Error 27
The drive cannot find the sector requested.
Error 28
The printer is out of paper.
Error 29
The system cannot write to the specified device.
Error 30
The system cannot read from the specified device.
Error 31
A device attached to the system is not functioning.
Error 32
The process cannot access the file because it is being used by another
process.
Error 33
The process cannot access the file because another process has locked a
portion of the file.
Error 36
Too many files opened for sharing.
Error 38
Reached end of file.
Error 39
The disk is full.
Error 50
The network request is not supported.
Error 51
The remote computer is not available.
Error 52
A duplicate name exists on the network.
Error 53
The network path was not found.
Error 54
The network is busy.
Error 55
The specified network resource or device is no longer available.
Error 56
The network BIOS command limit has been reached.
Error 57
A network adapter hardware error occurred.
Error 58
The specified server cannot perform the requested operation.
Error 59
An unexpected network error occurred.
Error 60
The remote adapter is not compatible.
Error 61
The printer queue is full.
Error 62
Space to store the file waiting to be printed is not available on the
server.
Error 63
Your file waiting to be printed was deleted.
Error 64
The specified network name is no longer available.
Error 65
Network access is denied.
Error 66
The network resource type is not correct.
Error 67
The network name cannot be found.
Error 68
The name limit for the local computer network adapter card was exceeded.
Error 69
The network BIOS session limit was exceeded.
Error 70
The remote server has been paused or is in the process of being started.
Error 71
No more connections can be made to this remote computer at this time
because there are already as many connections as the computer can
accept.
Error 72
The specified printer or disk device has been paused.
Error 80
The file exists.
Error 82
The directory or file cannot be created.
Error 83
Fail on INT 24
Error 84
Storage to process this request is not available.
Error 85
The local device name is already in use.
Error 86
The specified network password is not correct.
Error 87
The parameter is incorrect.
Error 88
A write fault occurred on the network.
Error 89
The system cannot start another process at this time.
Error 100
Cannot create another system semaphore.
Error 101
The exclusive semaphore is owned by another process.
Error 102
The semaphore is set and cannot be closed.
Error 103
The semaphore cannot be set again.
Error 104
Cannot request exclusive semaphores at interrupt time.
Error 105
The previous ownership of this semaphore has ended.
Error 107
Program stopped because alternate diskette was not inserted.
Error 108
The disk is in use or locked by another process.
Error 109
The pipe has been ended.
Error 110
The system cannot open the device or file specified.
Error 111
The file name is too long.
Error 112
There is not enough space on the disk.
Error 113
No more internal file identifiers available.
Error 114
The target internal file identifier is incorrect.
Error 117
The IOCTL call made by the application program is not correct.
Error 118
The verify-on-write switch parameter value is not correct.
Error 119
The system does not support the command requested.
Error 120
This function is only valid in Windows NT mode.
Error 121
The semaphore timeout period has expired.
Error 122
The data area passed to a system call is too small.
Error 123
The filename, directory name, or volume label syntax is incorrect.
Error 124
The system call level is not correct.
Error 125
The disk has no volume label.
Error 126
The specified module could not be found.
Error 127
The specified procedure could not be found.
Error 128
There are no child processes to wait for.
Error 130
Attempt to use a file handle to an open disk partition for an operation
other than raw disk I/O.
Error 131
An attempt was made to move the file pointer before the beginning of the
file.
Error 132
The file pointer cannot be set on the specified device or file.
Error 133
A JOIN or SUBST command cannot be used for a drive that contains
previously joined drives.
Error 134
An attempt was made to use a JOIN or SUBST command on a drive that has
already been joined.
Error 135
An attempt was made to use a JOIN or SUBST command on a drive that has
already been substituted.
Error 136
The system tried to delete the JOIN of a drive that is not joined.
Error 137
The system tried to delete the substitution of a drive that is not
substituted.
Error 138
The system tried to join a drive to a directory on a joined drive.
Error 139
The system tried to substitute a drive to a directory on a substituted
drive.
Error 140
The system tried to join a drive to a directory on a substituted drive.
Error 141
The system tried to SUBST a drive to a directory on a joined drive.
Error 142
The system cannot perform a JOIN or SUBST at this time.
Error 143
The system cannot join or substitute a drive to or for a directory on
the same drive.
Error 144
The directory is not a subdirectory of the root directory.
Error 145
The directory is not empty.
Error 146
The path specified is being used in a substitute.
Error 147
Not enough resources are available to process this command.
Error 148
The path specified cannot be used at this time.
Error 149
An attempt was made to join or substitute a drive for which a directory
on the drive is the target of a previous substitute.
Error 150
System trace information was not specified in your CONFIG.SYS file, or
tracing is disallowed.
Error 151
The number of specified semaphore events for DosMuxSemWait is not
correct.
Error 152
DosMuxSemWait did not execute; too many semaphores are already set.
Error 153
The DosMuxSemWait list is not correct.
Error 154
The volume label you entered exceeds the label character limit of the
target file system.
Error 155
Cannot create another thread.
Error 156
The recipient process has refused the signal.
Error 157
The segment is already discarded and cannot be locked.
Error 158
The segment is already unlocked.
Error 159
The address for the thread ID is not correct.
Error 160
The argument string passed to DosExecPgm is not correct.
Error 161
The specified path is invalid.
Error 162
A signal is already pending.
Error 164
No more threads can be created in the system.
Error 167
Unable to lock a region of a file.
Error 170
The requested resource is in use.
Error 173
A lock request was not outstanding for the supplied cancel region.
Error 174
The file system does not support atomic changes to the lock type.
Error 180
The system detected a segment number that was not correct.
Error 183
Cannot create a file when that file already exists.
Error 186
The flag passed is not correct.
Error 187
The specified system semaphore name was not found.
Error 196
The operating system cannot run this application program.
Error 197
The operating system is not presently configured to run this
application.
Error 199
The operating system cannot run this application program.