Installing pcANYWHERE32 8.0 on Windows NT 4.0 with ATI Rage-Based Video Card (186147)


The information in this article applies to:

  • Microsoft Windows NT Server 4.0
  • Microsoft Windows NT Server, Enterprise Edition 4.0
  • Microsoft Windows NT Workstation 4.0
This article was previously published under Q186147

SYMPTOMS

You are running Windows NT 4.0 on a computer using one of these ATI Rage- based video cards:

  • XPERT@PLAY
  • XPERT@WORK
  • All-In-Wonder
  • 3D PRO TURBO
  • 3D PRO TURBO PC2TV
  • 3D XPRESSION+ & 3D XPRESSION+ PC2TV
  • 3D CHARGER
You have installed pcANYWHERE32, but on the reboot, Windows NT 4.0 displays a blue screen error. You can boot by selecting "VGA Mode only."

In some situations, the computer may boot correctly, but CTRL+ALT+DEL and file transfers do not work.

CAUSE

pcANYWHERE 8.0 requires 8514a.dll to be loaded to work with these video drivers.

RESOLUTION

The driver installation file, Ati.inf, that ships with the ATI Rage video card contains an error; it installs two video drivers into the system registry, but only copies one of the associated .dll files into the WinNT\System32 folder.

There are two ways to resolve this issue. You can perform both procedures from either the MS-DOS prompt or the VGA mode in Windows NT.

Solution One

Follow these steps to replace the file:
  1. Expand the resource file 8514a.dll from the Windows NT 4.0 CD.
  2. Move this file to the WinNT\System32 folder.
  3. Reboot the computer.
  4. If you were able to boot into Windows NT 4.0 before this procedure, reinstall pcANYWHERE32 to disable the fault-tolerant boot mode.

Solution Two

Follow these steps to reinstall the video driver:
  1. Uninstall pcANYWHERE32 version 8.0.
  2. Manually edit the Ati.inf file.
  3. Locate the [ati.Display] section and add in a reference to 8514a.DLL.

    The modified [ati.Display] section should read as follows:

    [ati.Display]
    ati.dll
    8514a.dll

  4. Save the Ati.inf file.
  5. Right-click the desktop and select Properties.
  6. Click the Settings tab.
  7. Click Display Type.
  8. Click Change.
  9. Click Have Disk and point to the Ati.inf file that you modified in step 3.
  10. Complete the wizard. You may be required to provide the Windows NT 4.0 CD-ROM.
  11. Reboot the system.
  12. Reinstall pcANYWHERE32 version 8.0.

MORE INFORMATION

For additional information about this issue, see the following Symantec documents on the Web:

http://service1.symantec.com/SUPPORT/pca.nsf/docid/1997111012243

http://service1.symantec.com/SUPPORT/pca.nsf/43a0bb88345b815a85256450004ddb6a/e9a8409af3d20b01882565010059a26a?OpenDocument

Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
Modification Type:MajorLast Reviewed:8/10/2001
Keywords:kbprb KB186147
©2002 Microsoft Corporation. All rights reserved.