PI: ErrMsg: Kodak DC50 Camera Not Connected (166887)
The information in this article applies to:
- Microsoft Picture It! 1.0
This article was previously published under Q166887 SYMPTOMS
When trying to acquire images from the Kodak DC50, you may receive an error
message that the camera is not connected.
CAUSE
Your computer has a version of Kodak's PictureWorks Photoenhancer for the
DC50 or Photoenhancer Plus installed.
RESOLUTION
To correct the problem, move these files as follows:
- Click the Start button, point to Programs, and then click Windows
Explorer.
- Go to the \Windows\System folder and locate the two files:
- To select both files, click the first file hold down the
CTRL key and click the second.
- Right-click the selected files, and click Cut from the menu that
appears.
- Right-click the Photen folder (or whatever folder you installed
Photoenhancer to) and click Paste on the menu that appears.
If you continue to have problems, do the following:
- Click the Start button, point to Programs, and then click
Windows Explorer.
- Go to the \Windows\Twain\DC50 folder and locate the two files:
- To select both files, click the first file hold down the
CTRL key and click the second.
- Right-click the selected files, and click Cut on the menu that appears.
- Right-click the \Windows\System folder and click Paste on
the menu that appears.
MORE INFORMATION
This information is taken from the 50update.txt file dated 7/30/96 that
comes with the TWAIN datasource for the Kodak DC50 camera.
Modification Type: | Major | Last Reviewed: | 3/25/2001 |
---|
Keywords: | kb3rdparty kberrmsg KB166887 |
---|
|