Print Disk Administrator Screen to Record Hard Drive Information (164386)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0
This article was previously published under Q164386 SUMMARY
To assist in recovering lost volume sets, extended volume sets, stripe
sets, or fault tolerance sets, customers will call and request advice from
engineers on how to rebuild their hard drive information. Although
Microsoft has tools available that can often aid in rebuilding this
information, it is necessary to obtain vital information about the
computer, such as the following examples:
- In what order were partitions added to the stripe set?
- What drives are part of the extended volume set?
- What partitions are actually mirrored?
This article describes procedures to create a printout of the Disk
Administrators Screen so valuable hard drive configuration information
is preserved.
NOTE: It is always preferable to save the disk information to a floppy disk
by pointing to configuration and clicking save from the partition menu in
Disk Administrator. The procedures in this article are intended to
supplement this process and not replace it.
Modification Type: | Major | Last Reviewed: | 5/14/2003 |
---|
Keywords: | kbhowto KB164386 |
---|
|