TN3270 Client Cannot Get Past the USSTAB Screen Using ENTER (161191)
The information in this article applies to:
- Microsoft SNA Server 2.0
- Microsoft SNA Server 2.1
- Microsoft SNA Server 2.11
- Microsoft SNA Server 2.11 SP1
This article was previously published under Q161191 SYMPTOMS
TN3270 clients cannot proceed past the USSTAB screen (also known as a msg-
10 screen) by pressing the ENTER key. In this configuration, the clients
receive the USSTAB screen from the host when the notify is sent. At the
site where this problem was raised, the USSTAB screen prompted the user to
press ENTER to continue. It actually accepts any keystroke, but has been
written to prompt for ENTER.
CAUSE
The TN3270 server receives the ENTER keystroke from the client (AID key
x'7D'), but sends the host a frame with no data (a frame with a TH, RH, but
no RU).
DLC ---------------------------------------------- 13:53:33.04
DLC 01020101->05160000 DLC DATA
DLC DAF:00 OAF:05 ODAI:off Normal
DLC RQD FMD BC EC DR1
DLC
DLC ---- Header at address 00CC4210, 1 elements ----
DLC 01020040 00012C00 0005006A 01009A00 <...@..,....j....>
DLC
DLC ---- Element at address 011BB36C, start 10, end 12 ----
DLC 038000 <... >
RESOLUTION
To resolve this problem, obtain the hotfix mentioned below.
STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 2.0,
2.1, 2.11, and 2.11.
This problem was corrected in the latest Microsoft SNA Server 2.11 U.S.
Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
Modification Type: | Major | Last Reviewed: | 11/26/2003 |
---|
Keywords: | kbbug kbfix kbnetwork KB161191 |
---|
|