INFO: How to Determine When 3270 RTM Data Should be Sent (158570)
The information in this article applies to:
- Microsoft Host Integration Server 2000
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 3.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 4.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft Host Integration Server 2004
This article was previously published under Q158570 SUMMARY
SNA Server supports the ability to report an user's 3270 response time data
to NetView, using standard NetView Response Time Monitor (RTM) Network
Management vector data messages. This article documents the configuration
options that determine when RTM data is reported to NetView.
When you configure 3270 Response Time Monitor (RTM) data in SNA Server
Admin under Options and RTM Triggers, the option states the following:
RTM Data Sent at:
Select one or both of the following:
Counter Overflow: To cause RTM data to be sent to the host when the
number of host responses in a given time period overflows the size of
the available counter, select this check box.
End of Session: To cause RTM data to be sent to the host at the end of
each LU-to-LU session, select this check box.
NOTE: It is recommended that you always choose the Counter Overflow method.
If this is not chosen, RTM counters may "wrap" and may cause the reported
data to be inaccurate.
Modification Type: | Major | Last Reviewed: | 3/17/2005 |
---|
Keywords: | kbenv kbinfo KB158570 |
---|
|