Cannot Recognize Devices Attached to BusLogic BT-946c (154712)


The information in this article applies to:

  • Microsoft Windows NT Server 4.0
  • Microsoft Windows NT Workstation 4.0
This article was previously published under Q154712

SYMPTOMS

When you install the driver for the BusLogic BT-946c SCSI host adapter, the driver may load successfully but no devices attached to it may be recognized.

CAUSE

The BusLogic BT-946c adapter is supported with BIOS revision 4.92e and firmware revision 4.25j.

RESOLUTION

Contact BusLogic for BIOS and/or firmware updates.

MORE INFORMATION

In addition, the BusLogic BT-946c adapter is not currently included on the Hardware Compatibility List for RISC platforms. BusLogic currently builds its adapter configuration tools into the adapter's firmware, which cannot be accessed on RISC platforms (DEC Alpha, MIPS, PowerPC). Adapters that cannot be configured while installed in a RISC platform are not certified for Windows NT as being compatible with that platform.

Modification Type:MajorLast Reviewed:8/8/2001
Keywords:kbsetup KB154712
©2002 Microsoft Corporation. All rights reserved.