Windows NT Setup Stops on Compaq Prosignia 486/66 with Netflex-L (152126)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
This article was previously published under Q152126

SYMPTOMS

When installing Windows NT 3.51 Server or Workstation on a Compaq Prosignia 486/66 with the embedded Netflex-L adapter using Pcntn3.sys, Setup may stop responding at the "Starting Network" portion of the GUI setup.

RESOLUTION

  • Install the MSLOOPBACK adapter during Setup. After setup is complete, you can add the Pcntn3.sys driver successfully.

    -OR-
  • Use the latest Compaq SSD and install the Compaq Standard EISA HAL during setup. Also, make sure to load the Netflex-L driver that is included with the latest SSD.

STATUS

The Prosignia 486/66 is manufactured by Compaq Computer Corpoaration, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Modification Type:MajorLast Reviewed:12/16/2003
Keywords:KB152126
©2003 Microsoft Corporation. All rights reserved.