DCA X.25 Link Service Problem in SNA Server Setup (148958)
The information in this article applies to:
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11 SP1, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q148958 SYMPTOMS
If you enter incorrect information for "T1 Timeout" or "T2 Retry Limit" in
the DCA X.25 Link Service Setup dialog box, you are unable to return to the
Setup Message dialog box. No error message appears.
RESOLUTION
To correct this situation, enter the correction information for the entries
mentioned above.
STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 2.0,
2.1, 2.11 and 2.11 Service Pack 1. We are researching this problem and will
post new information here in the Microsoft Knowledge Base as it becomes
available.
Modification Type: | Major | Last Reviewed: | 11/26/2003 |
---|
Keywords: | kbnetwork KB148958 |
---|
|