Incorrect Token Ring Frame Type Causes "Request Timed Out" (148630)

The information in this article applies to:

Microsoft Windows for Workgroups 3.11
Microsoft TCP/IP-32 for Windows for Workgroups 3.11
Microsoft TCP/IP-32 for Windows for Workgroups 3.11a

This article was previously published under Q148630

SYMPTOMS

When you attempt to Ping an address within or beyond your local token ring subnet using TCP/IP-32 and NetWare IPX/ODI stack in Windows for Workgroups, the following error message appears:

Request Timed Out

RESOLUTION

To correct this problem, manually change the frame type in the PROTOCOL.INI (or NET.CFG) file. The following are the required Token Ring frame type syntaxes for workstations that need PROTOCOL.INI modifications:

Network Client version 3.0 for MS-DOS and Windows:
```
      FRAME=TOKENRING
						
```
Windows for Workgroups 3.11:
```
      FRAME=TOKEN-RING
						
```
NetWare (modify NET.CFG):
```
   FRAME=TOKEN-RING and TOKEN-RING_SNAP
```

Modification Type:	Major	Last Reviewed:	10/13/2003
Keywords:	KB148630 kbAudDeveloper