IBM LANStreamer PCI Token Ring Adapter Identified as Ethernet (148196)
The information in this article applies to:
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11 SP1, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q148196 SYMPTOMS
After you install and configure an SNA Server 802.2 DLC link service using
an IBM LANStreamer PCI Token Ring adapter, the 802.2 connection appears as
Ethernet in the SNA Server Admin program. However, the LANStreamer adapter
functions properly in the token ring network.
CAUSE
This problem occurs if the MediaType registry entry for the IBM LANStreamer
PCI Token Ring adapter is set to 1 (Ethernet) during the installation of
the SNA Server 802.2 DLC link service. This value is used by SNA Server
Setup and is passed to the SNA Admin program.
RESOLUTION
To work around this problem, please see the following article in the
Microsoft Knowledge Base:
140149 SNA 802.2 Connection Icon Indicates Incorrect Network Type
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.51. We
are researching this problem and will post new information here in the
Microsoft Knowledge Base as it becomes available.
Modification Type: | Major | Last Reviewed: | 12/8/2003 |
---|
Keywords: | kbbug kbpending KB148196 |
---|
|