HP Design Jet 650C Prints Large HPGL/2 Files Slowly (147241)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q147241 SYMPTOMS
Hewlett-Packard (HP) Design Jet 650C prints large HPGL/2 files slowly.
CAUSE
The following is an excerpt from the dj650c FAQ available on the HP WEB
site:
The HP Design Jet 650C plotter has an I/O limit of 10KB/sec when
printing HP GL/2 files. When printing large files, ie: greater than
physical RAM of the printing device, the I/O limit of the printer slows
performance. Once the spooler has filled the maximum RAM on the
printing device the I/O is limited to 10 KB/sec with HP GL/2 files and
60 KB/sec with HP RTL files.
The HP Design Jet 650C on-board RAM can be expanded to 68 MBs. Chips are
available in 4, 8, 16, and 32 MBs.
More information about the capabilities of the HP650c may be found on the
internet at the following World Wide Web site:
The products included here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 12/8/2003 |
|---|
| Keywords: | KB147241 |
|---|
|