SNA Server Event ID 18 Reports Incorrect Sense Data (140524)
The information in this article applies to:
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q140524 SYMPTOMS
The Sense Data that is logged as part of the Event ID 18 description in the
Windows NT application log is not logged accurately.
This symptom occurs when SNA Server receives a BIND Negative Response or an
UNBIND Request for an APPC session and logs Event ID 18 in the Windows NT
application log.
However, SNA Server traces do show the correct Sense Data for the error
that is causing Event ID 18 to be logged.
Note: Chapter 9 of the IBM SNA Formats Guide (GA27-3136) details IBM Sense
Codes.
CAUSE
Event ID 18 is logging incorrect Sense Data because of the following
two problems:
- The secondary sense data (bytes 2 & 3) are being logged to a random
value.
- If either the primary or secondary sense data have a value of 8000 or
greater, it is logged as FFFF8xxx.
RESOLUTION
Microsoft has updated the following files to correct this problem:
<snaroot>\SYSTEM\SNASERVR.EXE
<snaroot>\SYSTEM\TRCSERVR.EXE
STATUS
Microsoft has confirmed this to be a problem in SNA Server for Windows NT.
This problem was corrected in the latest SNA Server for Windows NT, 2.11
U.S. Service Pack. For information on obtaining the Service Pack, query on
the following word in the Microsoft Knowledge Base (without the spaces):
Modification Type: | Major | Last Reviewed: | 12/5/2003 |
---|
Keywords: | kbbug kbfix KB140524 |
---|
|