Compatibility with S/36 (138804)
The information in this article applies to:
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11 SP1, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q138804 SYMPTOMS
This article describes how to configure SNA Server to communicate with an
IBM S/36 (SSP release 5.5 or later) over 802.2 Token Ring to support 5250
emulation. Both SNA Server and S/36 configuration parameters are discussed.
NOTE: The SNA Server 5250 applet shipped with SNA server 2.11 and before
did not support S/36 device emulation. An updated applet which supports
both AS/400 and S/36 is available from Microsoft.
STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 2.0,
2.1, 2.11 and 2.11 Service Pack 1.
This problem was corrected in the latest Microsoft SNA Server 2.11 U.S.
Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
Modification Type: | Major | Last Reviewed: | 4/1/2004 |
---|
Keywords: | kbbug kbfix kbnetwork KB138804 kbAudDeveloper |
---|
|