Changing NetBIOS Name Resolution Order in Windows for Workgroups (137966)

MORE INFORMATION

In Windows for Workgroup running TCP/IP-32, these default settings can be modified to change to NetBIOS name resolution mode to B-node, P-node, M-node, or H-node.

To change the NetBIOS name resolution order:

1. Open the SYSTEM.INI file with a text editor.
2. In the [NBT] section, add the following entry:

   NodeType = 1, 2, 4, or 8

   These values specify the mode of NetBIOS name resolution used by NetBIOS over TCP/IP, where:

   1 = b-node
   
   2 = p-node
   
   4 = m-node
   
   8 = h-node.

   NOTE: This value can also be configured via DHCP Manager on the DHCP server. Under DHCP Options, select Scope or Global. The default is 1 (b- node). If no value is specified and a WINS server is specified and its NodeType is blank, then the default is 8 (h-node). On the Windows for Workgroups client configure it to use DHCP under Control Panel, Network, highlight TCP/IP Protocol in the Installed Network Software windows and select Configure. Enter an X in the Enable Automatic DHCP Configuration box by clicking on it. Click on OK and reboot the Windows for Workgroup client.
3. Save your changes and restart Windows.

NOTE: For more details on node type implementation refer to TCP/IP-32 online help.