PC Gen: Mail Version 3.5 Disk 1 Label Clarification (137616)


The information in this article applies to:

  • Microsoft Mail for PC Networks 3.5
This article was previously published under Q137616

SUMMARY

Two disks are labeled Disk 1 in the version 3.5 Microsoft Mail package.

One of the disks is labeled:

Disk 1 - Setup
Postoffice\Server Upgrade
Programs

The other is labeled:

Disk 1 - Setup
Server Programs

The disk

Disk 1 - Setup
Postoffice\Server Upgrade
Programs

is used to upgrade the Microsoft Windows for Workgroups Mail postoffices (WGPO).

NOTE: A WGPO also ships with Microsoft Windows NT. This disk will also upgrade the Windows NT WGPO.

The disk

Disk 1 - Setup
Server Programs

is used to install new Microsoft Mail postoffices, or upgrade existing version 3.x postoffices.

MORE INFORMATION

On page 7 of the Microsoft Mail for PC Networks "User Manual," the "Setting Up the Postoffice and Server Software" section refers to the initial creation of a Microsoft Mail 3.5 postoffice or upgrading a 3.x postoffice, and you should use the following disk:

Disk 1 - Setup
Server Programs

On page 11 of the Microsoft Mail for PC Networks "User Manual," the "Upgrading a Microsoft Postoffice" section refers to the upgrading of the WGPO, and you should use the following disk:

Disk 1 - Setup
Postoffice\Server Upgrade
Programs

Modification Type:MajorLast Reviewed:11/8/1999
Keywords:KB137616
©2002 Microsoft Corporation. All rights reserved.