Supported Network Adapters Not Available in Remoteboot Manager (136036)
The information in this article applies to:
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q136036 SYMPTOMS
When you set up a profile in Remoteboot Manager (RPLMGR.EXE), some
supported network adapters are not available. The supported network
adapters for Remoteboot are listed on page 112 of the "Windows NT Server
3.5 (and 3.51) Installation Guides."
RESOLUTION
To correct this problem, use the default profile in Remoteboot Manager if
you are using any one of the supported network adapters listed below. The
Remoteboot Service for Windows NT identifies the network adapter by its
vendor ID and passes the correct network adapter driver to the computer.
The following supported network adapters are not available for selection
in Remoteboot Manager:
3Com TokenLink
3Com TokenLink III
3Com 3Station
Madge Smart Ringnodes
IBM Token Ring
Novell NE1000
NOTE: The Madge Smart Ringnodes network adapter is not listed in page 112
of the Windows NT Server Installation Guides, but is one of the supported
network adapters for the Remoteboot service.
| Modification Type: | Major | Last Reviewed: | 10/29/2003 |
|---|
| Keywords: | KB136036 |
|---|
|