Windows NT SNMP Agent Allows Only Read Access (129129)



The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51

This article was previously published under Q129129

SYMPTOMS

When you attempt to change the string value of the sysContact, sysName, and sysLocation objects using an SNMP manager (such as the Hewlett Packard OpenView), the following error message appears:
SNMP error - sysContact read only (OV3122)

CAUSE

The Windows NT 3.5 SNMP agent only allows read access for the sysContact, sysName, and sysLocation objects. According to Internet MIB-II definition in RFC 1158, these SNMP objects should allow read and write access as follows:

   sysContact  OBJECT-TYPE

               SYNTAX  DisplayString (SIZE (0..255))
               ACCESS  read-write
               STATUS  mandatory
               DESCRIPTION
               "The textual identification of the contact person for this
               managed node, together with information how to contact this
               person."
               ::= { system 4 }

   sysName     OBJECT-TYPE

               SYNTAX  DisplayString (SIZE (0..255))
               ACCESS  read-write
               STATUS  mandatory
               DESCRIPTION
               "An administratively-assigned name for this managed node.
               By convention, this is the node's fully-qualified domain
               name."
               ::= { system 5 }

   sysLocation OBJECT-TYPE

               SYNTAX  DisplayString (SIZE (0..255))
               ACCESS  read-write
               STATUS  mandatory
               DESCRIPTION
               "The physical location of this node (e.g., 'telephone
               closet, 3rd floor')."
               ::= { system 6 }
				

RESOLUTION

To resolve this problem, install the fix mentioned below.

For Windows NT 3.51, upgrade to the latest service pack (Service Pack 4) and apply the fix mentioned below.

For Windows NT 3.5, upgrade to Windows NT 3.51 and the latest service pack (Service Pack 4) and apply the fix mentioned below.

STATUS

Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and 3.51. This problem was corrected in the latest U.S. Service Pack for Windows NT Workstation or Server version 3.51. For information on obtaining this update, query on the following word in the Microsoft Knowledge Base (without the spaces):

   S E R V P A C K
				



Modification Type:MajorLast Reviewed:12/15/2003
Keywords:kbnetwork KB129129