Cannot Connect to NRN Server with Dial-Up Networking (126460)
The information in this article applies to:
This article was previously published under Q126460 SYMPTOMS
You cannot connect to a NetWare Remote Network (NRN) server with Dial-Up
Networking. The modem usually drops the connection while you are entering
your user name and password.
CAUSE
This problem is caused by the NRN server's inability to recognize
compression or error correction by the modem.
RESOLUTION
To work around this problem, you must use a modem that can turn off these
features. To turn these features off, follow these steps:
- Click the Start button, point to Settings, and then click Control
Panel.
- Double-click the Modems icon.
- Click your modem and then click the Properties button.
- Click the Connection tab.
- Click the Advanced button.
- Click the Use Error Control check box to clear it. (NOTE: If this
check box is unavailable, your modem does not support these features.)
- Click the OK button.
Modification Type: | Major | Last Reviewed: | 7/28/2001 |
---|
Keywords: | kbDialUp KB126460 |
---|
|