CONN: LGTWGET and LMACGET Version 3.4.6 Update (126228)


The information in this article applies to:

  • Microsoft Mail Connection for PC and AppleTalk Networks 3.2
This article was previously published under Q126228

SUMMARY

Microsoft provides replacements for the LGTWGET.EXE and LMACGET.EXE program files that are included in version 3.2 of the Microsoft Mail Connection for PC and AppleTalk Networks.

For complete information about obtaining and installing the LGTWGET and LMACGET program files, see the following sections:

  • To download the updated files
  • To update your LGTWGET.EXE and LMACGET.EXE

MORE INFORMATION

This update contains the LGTWGET and LMACGET files, replacements for the LGTWGET and LMACGET program files included with version 3.2 of Microsoft Mail Connection for PC and AppleTalk Networks. This update resolves the following problem:

  • A message could get stuck in the Mail Connection Outbound Queue. Once this message is stuck, the gateway tries to resend this numerous times. This results in duplicate messages being transmitted and prevents other messages from being sent across the gateway. NOTE: To resolve this problem, two files must be updated: the LGTWGET.EXE file (included in this update) and the LMACGET.EXE file (included in this update).

To download the updated files

The following file is available for download from the Microsoft Download Center:

DownloadDownload Getupd.exe now

Release Date: 08-11-94

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

To update your LGTWGET.EXE and LMACGET.EXE files

At the MS-DOS command prompt, type the following and press ENTER after each line

copy <path>\lgtwget.exe <destination>

copy <path>\lmacget.exe <destination>

where <path> is the drive and directory where you ran the self- extracting GETUPD.EXE file and <destination> is the drive and directory where the LGTWGET.EXE and LMACGET.EXE files currently reside. For example, if you ran the self-extracting file from the TEST directory on drive D, and your two files are located in the MAILEXE directory on drive C, type the following commands:

copy d:\test\lgtwget.exe c:\mailexe

copy d:\test\lmacget.exe c:\mailexe

NOTE: The LGTWGET.EXE and LMACGET.EXE files typically reside on the postoffice server in the Mail executables directory.
Modification Type:MinorLast Reviewed:8/9/2004
Keywords:kbdownload kbgraphxlinkcritical KB126228
©2004 Microsoft Corporation. All rights reserved.