How to obtain Microsoft support files from online services (119591)
The information in this article applies to:
- Customer Service and Support Information
This article was previously published under Q119591 SUMMARY
This article contains information about obtaining Microsoft drivers,
patches, and other support files by downloading them from the Microsoft Download Center, which is located at the following Microsoft Web site:
The Microsoft Download Center provides:
- A single starting point for all downloadable files.
- The ability to search the entire Microsoft.com site for downloadable files.
- Reduced time in finding these files.
This article contains information
about the following topics.
General instructions for downloading- Windows files (.exe)
- Archive files (.zip)
- MS-DOS files (.exe)
- Macintosh-based files (.hqx, .bin, or .sea)
MORE INFORMATIONGeneral instructions for downloading
The files that Microsoft posts on online services are usually compressed,
self-extracting files.
Note Small files may not be compressed. These files appear with their original extensions and are not self-extracting.
Windows files (.exe)
Files designed for Windows have an .exe extension. These files are
compressed, self-extracting files. To correctly download and extract these
.exe files, follow these steps:
- Locate the file that you want to download.
- If you are downloading to a floppy disk, you need a formatted, blank
disk. If you are downloading to your hard disk, create a new folder in
which you can temporarily place the file and extract it.
Caution Do not download files directly to your Windows folder.
Doing so could overwrite files essential to the proper operation of
your computer.
- Follow the downloading procedure that is used by your Internet service provider to retrieve the
file you identified in step 1. Download it to a floppy disk or to a new
folder.
- Locate the file in the folder where it was downloaded, and then
double-click it to begin the installation process.
Note that some .exe files are compressed using the PKWare file-compression
utility. To correctly download and extract these .exe files, follow these
steps:
- Locate the file that you want to download.
- If you are downloading to a floppy disk, you need a formatted, blank
disk. If you are downloading to your hard disk, create a new folder in
which you can temporarily place the file and extract it.
Caution Do not download files directly into your Windows folder.
Doing so could overwrite files essential to the proper operation of
your computer.
- Follow the downloading procedure used by your Internet service provider to retrieve the
file you identified in step 1. Download it to a floppy disk or to a new
folder.
- To extract the contents of the self-extracting .exe file after you
download it, click Start, click Run, and then type the following command in the Run box:
where <path\filename> is the folder location and the name of the downloaded file.
For example, if you downloaded Sample.exe into the C:\Download folder,
type the following command in the Run box:
C:\Download\Sample.exe -d Note Although you can double-click a self-extracting .exe file to extract its contents, this step ensures that a recursively compressed file will maintain its file structure.
If you have problems extracting downloaded files, try downloading them
again.
Archive files (.zip)
Files that are designed to archive multiple files have a .zip extension. These files are compressed. To extract these files, you need to obtain a zip utility. Nico Mak Computing, Inc., has developed a zip utility for Windows called WinZip.
For more information about WinZip, please visit the following Nico Mak Computing, Inc., Web site:
To correctly download and extract these .zip files, follow these steps:
- Locate the file that you want to download.
- If you are downloading to a floppy disk, you need a formatted, blank
disk. If you are downloading to your hard disk, create a new folder in
which you can temporarily place the file and extract it.
Caution Do not download files directly to your Windows folder.
Doing so could overwrite files essential to the proper operation of
your computer.
- Follow the downloading procedure that is used by your Internet service provider to retrieve the file you identified in step 1. Download it to a floppy disk or to a new folder.
- Locate the file in the folder where it was downloaded, and then
double-click it to open the file in WinZip. Extract the files from WinZip to a folder on your hard disk.
The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
MS-DOS files (.exe)
These .exe files are compressed using the PKWare file-compression utility.
To correctly download and extract these .exe files, follow these steps:
- Locate the file that you want to download.
- If you are downloading to a floppy disk, you need a formatted, blank
disk. If you are downloading to your hard disk, create a new folder in
which you can temporarily place the file and extract it.
Caution Do not download files directly into your Windows folder.
Doing so could overwrite files essential to the proper operation of
your computer.
- Follow the downloading procedure used by your Internet service provider to retrieve the file you identified in step 1. Download it to a floppy disk or to a new folder.
- To extract the contents of the self-extracting .exe file after you
download it, click Start, click Run, and then type the following command in the Run box
where <path\filename> is the folder location and the name of the downloaded file.
For example, if you downloaded Sample.exe into the C:\Download folder,
type the following command in the Run box:
C:\Download\Sample.exe -d Note Although you can double-click a self-extracting .exe file to extract its contents, this step ensures that a recursively compressed file will maintain its file structure.
If you have problems extracting downloaded files, try downloading them
again.
Macintosh-based files (.hqx, .bin, or .sea)
If a file is Macintosh based, it has an .hqx or .bin extension. An .hqx
file is a BinHex 4.0 text-formatted file, and a .bin file is a MacBinary
formatted file.
When you download the .hqx or .bin file, you must decode it with Stuffit
Expander (or another utility that understands BinHex or MacBinary format,
such as BinHex 4.0 or CompactPro). Decoding converts the .hqx or .bin file
into an Installer file. Double-click the Installer file to install its
contents.
The .hqx or .bin file may also be decoded into a binary-formatted,
compressed .sea file. To extract the contents of this file, double-click
the <filename>.sea icon.
If you use Microsoft Internet Explorer 4.0 or later for the Macintosh, .hqx and .bin
files are automatically decoded as they are downloaded. To ensure that this
option is enabled, follow these steps in Internet Explorer 4.0 or later:
- On the Edit menu, click Preferences.
- Under Receiving Files, click Download Options.
- Under Download Manager Options, click to select the
Automatically decode MacBinary files and
Automatically decode BinHex files check boxes, and
click OK.
Modification Type: | Minor | Last Reviewed: | 8/28/2006 |
---|
Keywords: | kbPubTypeKC kbhowto KB119591 |
---|
|