UNCONF: PRB:GETS Disabled When All Records Are Deleted (119353)

*****************************************************************
**                          - WARNING -                        **
**    THE INFORMATION BELOW IS PRELIMINARY AND HAS NOT BEEN    **
**    CONFIRMED, EDITED OR TESTED BY MICROSOFT.  USE ONLY      **
**    WITH DISCRETION.                                         **
*****************************************************************
		

CAUSE

The CASE structure that is used in the ScreenWizard disables the GET fields and doesn't enable them when the ADD push-button is selected.

Steps to Reproduce Behavior

1. Enter the following into the Command window to create a new table:

      CREATE TABLE DATA (code1 c(1), code2 c(1), code3 c(1))
   
      INSERT INTO DATA (code1, code2, code3) ;
      VALUES ("A","B","C")
   
      INSERT INTO DATA (code1, code2, code3) ;
      VALUES ("B","C","A")
   
      INSERT INTO DATA (code1, code2, code3) ;
      VALUES ("C","A","B")
   
      INSERT INTO DATA (code1, code2, code3) ;
      VALUES ("A","C","A")
   						

2. Run the ScreenWizard using the table called DATA.DBF. Add all the fields;no sorting, choose 'Save and run screen'. Name the screen DATA.SCX.
3. On the new screen select the DELETE push-button. Delete the four(4) records inserted. When the last record is deleted, the ADD and CLOSE push-buttons will be active.
4. Push the ADD push-button and try to enter something into the fields.

All the get fields are disabled.

   SHOW GETS ENABLE