DLC Printing Devices Control Settings Must be the Same (114619)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q114619 SUMMARY
If your Windows NT or Windows NT Advanced Server print server uses Data
Link Control (DLC)-controlled printing devices, they must all have either
continuous connections or job-based connections; you cannot have some
connections of each type.
DLC printing does not allow you to configure some Hewlett-Packard (HP)
network printing ports as job-based and others as continuous. All ports
need to have the same type of connection.
The HP products discussed here are manufactured by Hewlett-Packard Co., a
vendor independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
Modification Type: | Major | Last Reviewed: | 11/20/2003 |
---|
Keywords: | kbnetwork kbprint KB114619 |
---|
|