HP LaserJet 4si Printer Driver Supports Only One Cartridge (110454)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q110454 SYMPTOMS
The Hewlett-Packard (HP) LaserJet 4si driver in Microsoft Windows NT and
Microsoft Windows NT Advanced Server only allows you to choose one font
cartridge.
CAUSE
The HP LaserJet 4si printer supports two font cartridges. The HP LaserJet
4si printer driver in Windows NT and Windows NT Advanced Server was ported
over from the HP LaserJet 4, which only supports one font cartridge.
WORKAROUND
You can use two font cartridges if you use the HP LaserJet 3si driver, but
you will lose the ability to print 600 dots per inch (dpi).
The Hewlett-Packard products included here are manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 4/9/2004 |
|---|
| Keywords: | kbHardware kbprint KB110454 |
|---|
|