Cannot Access Floppies While Using DC2000 Class Tape Drives (107392)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q107392 SUMMARY
You are unable to access your floppy disk drives while the tape driver
for your DC 2000 tape drive is running, that is, while Backup is
running. DC 2000 class tape drives are all QIC floppy controller-based
tape drives. Because most drivers for this type of tape drive take
full control of the floppy controller, other processes are not able to
access the floppy disk drives.
To regain access to the floppy drives, close Backup.
| Modification Type: | Major | Last Reviewed: | 11/20/2003 |
|---|
| Keywords: | KB107392 |
|---|
|