System Components Without Additional Registry Entries (102968)



The information in this article applies to:

  • Microsoft Windows NT Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1

This article was previously published under Q102968

SUMMARY

SYSTEM COMPONENTS WITH NO ADDITIONAL ENTRIES

The following system components do not write entries in the Registry, besides the basic information shown in CurrentControlSet\Services:
Abiosdsk               NetDDE
Beep                   Null
ClipSrv                Printing (all keys)
Cpqarray               Schedule service
Dellarry               SCSI class drivers
Delldsa                Simbad
Diskperf               Videoprt
File system drivers    Windbg
Floppy driver
MUP utility
				

HOW WINDOWS NT MAPS LAN MANAGER PARAMETERS

This section lists LAN Manager network service parameters and their Windows NT equivalents. LAN Manager parameters that relate to MS- DOS are not listed. Also, because Windows NT dynamically allocates memory for network operations, many LAN Manager parameters are no longer relevant.

LAN Manager vs. Windows NT Settings for Services

In LAN Manager, service parameter settings are found in the file LANMAN.INI. In Windows NT, these settings are stored in the Registry.

In Windows NT, these entries are in the Registry in HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\Service name\Parameters.

Alerter Service

Parameters in             Values in CurrentControlSet\Services
LANMAN.INI [alerter]      \LanmanServer\Parameters

sizalertbuf
				

Messenger Service

Parameters in               Values in CurrentControlSet\Services
LANMAN.INI [messenger]      \LanmanServer\Parameters

logfile            Messages are not stored
sizmessbuf         Set by operating system
				

Netlogon Service

Parameters in               Values in CurrentControlSet\Services
LANMAN.INI [Netlogon]       \Netlogon\Parameters

pulse              PulseInterval
randomize          Randomize
scripts            Use Server Manager or Services in Control Panel
update             Update
				

Remote Access Service

Parameters in               Values in CurrentControlSet\Services
LANMAN.INI [RemoteAccess]   \RemoteAccess\Parameters

audit                    EnableAudit
authenticateretries      AuthenticateRetries
authenticatetime         AuthenticateTime

Parameters in               Values in CurrentControlSet
LANMAN.INI [RemoteAccess]   \Services\RemoteAccess
                            \Parameters\NetbiosGateway\Parameters

autodisconnect           Autodisconnect
enablebroadcast          EnableBroadcast
maxdynmem                MaxDynMem
maxnames                 MaxNames
maxsessions              MaxSessions
multicastforwardrate     MulticastForwardrate
numworkbufs              -
raslannets               -
remotelisten             RemoteListen
sizworkbufs              SizWorkbufs
				

Replicator Service

Parameters in               Values in CurrentControlSet
LANMAN.INI [Replicator]     \Services\Replicator\Parameters

exportpath            Use Server Manager to set export path
exportlist            Use Server Manager to enter
                      To List names
guardtime             Guardtime
importpath            Use Server Manager to set import path
importlist            Use Server Manager to enter
                      To List names
interval              Interval
logon                 -
password              -
pulse                 Pulse
random                Random
replicate             User Server Manager to set in Windows NT
				

Server Service

Parameters in                Values in
LANMAN.INI [server]          CurrentControlSet\Services
                             \LanmanServer\Parameters

accessalert           -
alertnames            Use Server Manager to list users to receive alert
                      messages (also corresponds to Alertnames parameter
                      in Alerter section of the registry)
alertsched            Alertsched
auditing              Use User Manager for Domains to set audit policy
autodisconnect        Disc
autopath              -
autoprofile           -
diskalert             DiskspaceThreshold
erroralert            ErrorThreshold
guestacct             Use User Manager to enable guest account
logonalert            -
maxauditlog           Set using Event Viewer (also corresponds to
                      MaxSize entry in Eventlog section of registry)
maxchdevjob           -
maxnetbios            -
maxsessopens          SessOpens
maxsessreqs           MaxMpxCt
netioalert            NetworkErrorThreshold
noauditing            Set using User Manager
numadmin              -
numfiletasks          -
security              No share security
sizreqbuf             SizReqBuf
srvanndelta           AnnDelta
srvannounce           Announce
srvcomment            Comment
srvhidden             Hidden
userpath              -

Server heuristics      Values in
in LAN Manager         CurrentControlSet\Services \LanmanServer\Parameters

5      EnableFCOpens
6      ThreadPriority
10     ScavTimeout
11     EnableSoftCompat
15     OplockBreakWait

Autotuned server      Values in
parameters            CurrentControlSet\Services\LanmanServer\Parameters

maxshares          -
maxusers           -
numbigbuf          -
numreqbuf          -
				

SNMP Service

Parameters in          Values in
LANMAN.INI [snmp]      CurrentControlSet\Services \Snmp\Parameters

authtrap            Authtrap
communitynames      Communitynames
hostmasks           No hostmasks
trapdestinations    Trapdestinations
trapcommunity       Trapcommunity
version             -
				

UPS Service

Parameters in           Values in
LANMAN.INI[ups]         CurrentControlSet\Services\UPS (servers only)

batterytime         BatteryLife
cmdfile             Command File
messdelay           FirstMessageDelay
messtime            MessageInterval
recharge            RechargeRate
signals             Options
				

Workstation Service

Parameters in             Values in
LANMAN.INI[workstation]   CurrentControlSet\Services
                          \LanmanWorkstation\Parameters

charcount            MaxCollectionCount
chartime             CollectionTime
charwait             CharWait
computername,        Must be set through Network domain, othdomains
                     option in Control Panel
keepconn             KeepConn
keepsearch           This is hard coded to 5 minutes in Windows NT
maxcmds              Windows NT does not limit number of commands except as
                     specified  by the server
maxerrorlog          Error logs sizes set in Event Viewer
maxthreads           MaxCmds
maxwrkcache          Set by Windows NT cache manager
numalerts            Not applicable in Windows NT
numbcharbuf          Windows NT allocates buffers as needed.
numdgrambuf          MailslotBuffers
numservices          No limit to number of services in Windows NT.
numworkbuf           No limit to number of work buffers in Windows NT
sesstimeout          SessTimeout
sizcharbuf           SizCharBuf
sizerror             Self-configuring in Windows NT
sizworkbuf           No limit to the size of workstation buffers in
                     Windows NT except as specified by server.
wrkservices          Use Services option in Control Panel to set for
                     Windows NT

LAN Manager Workstation   Values in CurrentControlSet\Services
heuristics                \LanmanWorkstation\Parameters

0      UseOpportunisticLocking
5      UseLockReadUnlock
11     UseRawRead and UseRawWrite
19     Use512ByteMaxTransfer
				

NetBEUI Protocol

Parameters in            Values in
LANMAN.INI[netbeui]      CurrentControlSet\Services\nbf\Parameters

msdlcretries        LLCRetries
ncbs                -
netbiosretries      GeneralRetries
                    AddNameQueryRetries
                    NameQueryRetries
netbiostimeout      GeneralTimeout
                    AddNameQueryTimeout
                    NameQueryTimeout
t1                  DefaultT1Timeout
t2                  DefaultT2Timeout
ti                  DefaultTiTimeout
				

TCP/IP

Parameters in         Values in
LANMAN.INI[tcpip]     CurrentControlSet\Services
                      \adapter_name#\Parameters\Tcpip

ipaddress0        IpAddress0
subnetmask0       Subnetmask0

Parameters in         Values in
LANMAN.INI[tcpip]     CurrentControlSet\Services\TCPIP\Parameters

defaultgateway0   DefaultGateway
				

LAN Manager vs. Windows NT Settings for Adapter Cards

In LAN Manager, these entries are found in the [adaptercard] section of the
PROTOCOL.INI file.

In Windows NT, these entries are in the registry in HKEY_LOCAL_MACHINE
\SYSTEM\CurrentControlSet\Services\adapter name#\Parameters. However, you
can change most of settings for network adapter cards by using the Network
option in Control Panel.
				

3Com Etherlink II

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername           Drivername
interrupt            IRQ
ioaddress            IoBaseAddress
maxtransmits         -
netaddress           NetworkAddress
transceiver          Transceiver
xmitbufs             -
				

3Com EtherLink 16

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername           DriverName
iobase               IoBaseAddress
netaddress           NetworkAddress
				

Compaq 32-Bit DualSpeed Token Ring

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername           Drivername
earlyrelease         Earlyrelease
maxframesize         MaxFramesize
maxreceives          -
maxrequests          MaxInternalReqs
maxtransmits          -
netaddress           NetworkAddress
product_id           ProductId
				

DEC DEPCA

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername            DriverName
maxmulticast          MaxMulticstList
maxtransmits          -
				

IBM Token-Ring Adapters

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername            DriverName
earlyrelease          Earlyrelease
maxtransmits          -
netaddress            NetworkAddress
primary or alternate  IObaseAddress
product_id            -
ram (Adapter and      -
Adapter II only)
recvbufs              -
recvbufsize           -
xmitbufs              -
xmitbufsize           -
				

Intel EtherExpress 16

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername            Drivername
ioaddress             IobaseAddress
				

Novell NE2000

Parameters in             Values in
LANMAN.INI[adapterCard]   CurrentControlSet\Services
                          \adapter name#\Parameters

drivername            Drivername
interrupt             IRQ
iobase                IoBaseAddress
				

REFERENCES

"The Windows NT Resource Kit for Operating System Version 3.1".

Modification Type:MajorLast Reviewed:11/20/2003
Keywords:kbinfo kbother KB102968