Windows Reboots at Startup on the Texas Instruments SP1000 (100608)


The information in this article applies to:

  • Microsoft Windows 3.1
  • Microsoft Windows 3.11
This article was previously published under Q100608

SYMPTOMS

When you start Windows on a Texas Instruments (TI) SP1000, your machine may reboot if the statement DOS=HIGH or DOS=HIGH,UMB is in the CONFIG.SYS file.

RESOLUTION

To work around this problem remove any DOS= commands from your CONFIG.SYS file.

The TI SP1000 may require a machine (/M) switch on the HIMEM.SYS command line in the CONFIG.SYS file. Machine number 8 or 12 should correct this problem. Texas Instruments Technical Support recommends that you try the machine number 12 switch first.

The SP1000 is manufactured by Texas Instruments, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

For more information, call Texas Instruments Technical Support.
Modification Type:MajorLast Reviewed:10/10/2003
Keywords:KB100608
©2003 Microsoft Corporation. All rights reserved.