Compaq Management Agents and Tools for Servers for SCO UnixWare 7 NonStop Clusters

Version 5.10

May 2001

,

Note: You must use version 5.10 of the Compaq Insight Manager Console for this release.

This readme file contains the following information:

• Introduction

• Documentation

• Location and Files on the Compaq Management CD

• Installation

• Enhancements / New Features

• Supported Products

Introduction

The Compaq Management Agents and Tools for Servers for SCO UnixWare 7 NonStop Clusters software release contains Compaq Agent programs and related files for NonStop Clusters for SCO UnixWare 7. This release supports UnixWare 7.1.1 with SCO UnixWare 7 NonStop Clusters version 7.1.1+IP.

This version of Agents supersedes 5.00 Compaq Agents - NonStop Clusters for UnixWare 7.

Documentation

The documentation for the Compaq Management Agents and Tools for SCO UnixWare 7 NonStop Clusters includes the following:

• Read this documentation if you are viewing this file on a UnixWare or NT system:
  • Using the nscvu Utility -- About the NonStop Clusters Verification Utility
  • UPS-Initiated Shutdown -- About the Uninterruptible Power Supply management utility
  • Compaq Insight Manager Agents -- About the Compaq Insight Manager agents
  • Using the NonStop Cluster Monitor -- About the NonStop Cluster Monitor graphical user Interface.

  Location and Files on the Compaq Management CD

  The software release is located in the /Agents/Nsc-uw7/Eng/Compaq directory of the Compaq Management CD.

  This directory contains the following items: (The first character of Unix file names will be lower case.)

  Readme.txt

  A text file that points to the Readme.htm file. The Readme.txt file is viewed on NT systems with the Readme.com ascii viewer included at the top level of this CD.

  Readme.htm

  A file for viewing with any browser. On UnixWare systems, this file is readme.htm

  Docs directory

  This directory contains the documentation for the Compaq Management Agents and Tools for Servers for SCO UnixWare 7, which can be accessed using the links provided in the previous section. On a UnixWare system, this directory is docs

  Install

  The installation script.

  Nsc.pkg

  Contains all the files for the packages in UNIX SVR4 package format.

  Installation

  Use the following steps to install the agents.

  Before installing

  1. Be sure your system uses Version 7.42 or higher of the Compaq Enhanced Feature Supplement (EFS) for SCO UnixWare 7 and Version 7.42 or higher of the Compaq Host Bus Adapters (HBA). A Version of Smart Start compatible with the system hardware is required.

  2. You can obtain the correct EFS and HBA version from the following URL:

     http://www.compaq.com/support/files/server/US/

     This site lists server models.

     1. Select your server model from the list of servers.

     2. Select All Models to display a list of operating systems.

     3. From the list of operating systems, select SCO UnixWare 7 and select go.

     4. From the list on the next screen, select Bundles (Drivers and Agents)

     5. From the table, select Compaq EFS for SCO UnixWare 7 Version 7.42

     6. To make the necessary diskettes and install the HBA and EFS software, follow the installation instructions presented on the screen.

  Installing the Agents and Tools Directly from the Compaq Management CD

  To install the Agents directly from the Compaq Management CD, use the following instructions:

  1. Log in as root.

  2. Insert the Compaq Management CD into node one's CD-ROM drive.

  3. Mount the Compaq Management CD at /mnt:

     mkdir /mnt 

     mount -r -F cdfs -o ro /dev/cdrom/n1c1b0t0l0 /mnt 

     Use the appropriate cdrom device for your system.

  4. Execute the install script using the following command, and follow the directions on the screen:

     sh /mnt/agents/nsc-uw7/eng/compaq/install 

     Note: During the installation of PTF nsc1013, you may be asked to perform a download. Ignore this message.

  5. Unmount the Compaq Management CD using the following command:

     cd /; umount /mnt

  6. Remove the Compaq Management CD from CD-ROM drive.

  Installing the Agents and Tools Directly from a softpaq

  To install the Agents directly from the Compaq Management CD, use the following instructions:

  1. Log into the NonStop(TM) UnixWare 7 cluster as root

  2. Transfer the softpaq file to a location such as /tmp 

  3. If a previous version of this software has been installed, 
     remove it with the following command: 
     pkgrm -n nsctools cmanic cmastor cmasvr cmafdtn
  4. Expand the installation files and install the software with the following command, where xxxxx is the softpaq number:
     tar -xof spxxxxx.tar
     
  5. Change to the installation area directory within the expanded directory 
     structure using the following command:
     cd nsc-uw7/eng/compaq
  6. Install the software with the following command:
     sh ./install

  Enhancements / New Features

• NonStop Clusters for SCO UnixWare 7 version 7.1.1+IP is now supported.
• The nsctools package contains the NonStop Cluster Monitor.

Supported Products

See the NonStop Clusters for SCO UnixWare 7 certification matrix at the following URL:

http://www.compaq.com/solutions/enterprise/highavailability/sco