Symbios Logic SDMS 4.0 BTLDPCI-4.06.00 Diskette Building Instructions:


To create a BTLD diskette for SCO OpenServer installations, copy the raw 
dd image file onto a 1.44 MB floppy. This process is dependent upon the 
operating system that you are using to create this diskette. See the 
instructions below for UNIX System and DOS System Users.

-------------------------------------------------
For UNIX System Users

1. Insert a 3.5" diskette into the floppy drive. 

2. At the UNIX prompt type: 

	dd if=/<path>/SCO40600.DD of=/dev/fd0135ds18

The <path> is where the dd image is located. On this CD, the dd image file
is located here:

	{UNIX CDROM path}/DRIVERS/UNIX/SCOUNIX

This command will dd the image to the floppy to create a BTLD diskette.

-------------------------------------------------
For DOS System Users

Use a utility that will copy the raw .DD image onto a 1.44 MB floppy. 
This .DD image is located at:

	{DOS CDROM path}:\DRIVERS\UNIX\SCOUNIX\SCO40600.DD 

"Rawrite", which is a public domain utility, is available on this CD. 
Instructions for using this utility are included in its accompanying 
"RAWRITE3.DOC" file. Rawrite is included on this CD-ROM at this location: 

	{DOS CDROM path}:\DRIVERS\UNIX 

After the image has been copied to a 3.5" diskette, use this BTLD diskette
for SCO OpenServer installations as instructed.