EM525 AT Ethernet Adapter Data Sheet Key Features: -16-bit I/O mapped AT adapter for PC workstations -Intel® 82595 TX LAN coprocessor chip -64K on-board RAM -Completely software configurable -Optional universal boot PROM (RPL) -Combo version supports all three cable types,also BNC and TP only versions -Drivers for all popular networks -Limited lifetime warranty Cogent offers Ethernet products to meet every adapter and repeater environment, including 10BASE-2, 10BASE-T, 100BASE-TX, 100BASE-T4, and 100BASE-FX (fiber). EM525 AT is the optimal price/performance Ethernet adapter for Industry Standard Architecture (ISA) bus PC workstations. With its high throughput and efficient CPU utilization, the EM525 AT adapter is the perfect workstation complement to your high performance eMASTER+ server adapters. And, EM525 AT is optimized for 486 and Pentium workstations for maximum performance advantages. Workstation performance to match your server Because a network connection is only as fast as its slowest point, even a high performance network adapter in a superserver can’t whip a network with slow workstation adapters into shape. Recognizing this fact, Cogent designed its entire line of eMASTER+ adapters with total system performance in mind. With the EM525 AT adapter, you can be sure that your workstation adapters will always be able to keep up with your server, no matter how severe the network load. EM525 AT is the ideal workstation companion board to Cogent’s eMASTER+ EISA and PCI server adapters, and enables networks to benefit from Cogent’s Predictive Pipelining technology. EM525 AT maintains high system throughput in any sized network and provides an extra advantage for environments running resource-intensive applications requiring high network bandwidth. Unlike other adapters which show significant degradation in performance even under moderate loads, EM525 AT is relatively insensitive to load. With throughput that can exceed 900 KBytes/sec., EM525 AT is fast enough to handle data transfers at full cable bandwidth performance that can make you and your network more productive. Easier to use EM525 AT is a jumperless design that is easy to install and customize to your environment. A software installation utility automates the installation process. Once EM525 AT is installed, board level user diagnostics fully test your configuration to verify proper operation. EM525 AT gives you a choice of models, including BNC only, twisted pair only, and combo versions. With on-board connectors for thick coax, thin coax (Cheapernet), and twisted pair cabling, EM525 AT Combo supports all three Ethernet cable types on a single adapter so you can easily adapt to your company’s future network needs with no added expense. Product Specifications Systems Supported IBM PC/AT and compatible ISA based machines Bus Interface 16-bit programmed I/O Ethernet Controller Intel 82595 LAN coprocessor chip Buffer Memory 64K, I/O mapped Hardware Interrupts IRQ 3, 5, 9, 10, 11 PROM Base C800h, CC00h, D000h, D400h, D800h, DC00h, NO PROM Base I/O Address 300h, 310h, 320h, 330h, 340h, 350h, 360h, 370h, 380h, 390h, 3A0h, 3B0h, 3C0h, 3D0h, 3E0h, 3F0h Reliability Calculated MTBF >100,000 hours Power Requirements + 5 volts @ 2.0 Amp max. +12 volts (for MAU only) Environmental Operating Range Temperature: 0° C to 50° C Relative Humidity: 5% to 85% non-condensing Altitude: 3000m maximum Interface Connections BNC, AUI, RJ-45 Dimensions 8.1" x 5" Standards Compliance Ethernet IEEE 802.3 10BASE-T Ethernet IEEE 802.3 10BASE-2 Ethernet IEEE 802.3 10BASE-5 FCC Class B Radiation compliant UL rated PCB Drivers Available 3.5" diskette NetWare 2.x, 3.x, 4.x, NetWare Lite, Personal NetWare, LAN Manager, SCO UNIX, VINES, Artisoft LANtastic, Windows for Workgroups, Windows NT, Windows 95, DEC PATHWORKS for DOS, FTP PC/TCP, LAN WorkPlace, NEXTSTEP Diagnostic LEDs Link Integrity (for 10BASE-T) Network Activity Warranty All eMASTER+ series adapters are protected by a limited lifetime warranty 

Ordering Information



Order Number    Connectors

EM525 C             AUI, BNC, UTP

EM525 C/5  5-pack version of EM525 C

EM525 C/20     20 pack version of EM525 C

EM525         BNC

EM525/5              5-pack version of EM525

EM525/20 20 pack version of EM525

EM525 TP        UTP

EM525 TP/5   5-pack version of EM525 TP

EM525 TP/20   20 pack version of EM525 TP



Made in U.S.A.



Cogent Sales                    Cogent Corporate                  Cogent Europe

15375 SE 30th Place, Suite 310   175 West St. P.O. Box 926         Rosenstraße 7

Bellevue, WA  98007  U.S.A.      Friday Harbor, WA  98250  U.S.A.  80331 Munich Germany

Tel (206) 603-0333                Tel (360) 378-2929                Tel [49]89/231138-88

Fax (360) 378-2882                Fax [49]89/231138-11              Fax (206) 603-9223

Toll-free in U.S. 1-800-426-4368   

E-mail sales@cogentdata.com      





1994 Cogent Data Technologies, Inc. All rights reserved. Printed in U.S.A.

Product specifications are subject to change without notice.

Cogent is a registered trademark and eMASTER+, Predictive Pipelining, and Quartet

are trademarks of Cogent Data Technologies, Inc. All other trademarks are the property

of their respective owners.