This CSD contains corrections and enhancements to the VoiceType 3.0 product. You can download the CSD free of charge, or you can receive the CSD in diskette form for a nominal charge.

For a list of the corrections contained in this CSD, see the IBM VoiceType 3.0 Corrective Service #1 Corrections Guide.

If you choose to download this CSD, you should be aware of the following:

• The CSD is approximately 3.4 megabytes.
• Downloading time is approximately 40-45 minutes (if you are using a 14.4K baud modem), or 20 minutes (if you are using a 28.8K baud modem).
• You can download the CSD in either of two formats: a self-installing file (which can be installed only on the system used for downloading), or a diskette images file (which you can copy onto diskettes for installation on other systems).

Note: This installation procedure requires up to 9 MB of hard file space. Be sure that you have sufficient space available.

Before you proceed, be sure that all applications, especially the Control Panel, are closed.

To install this CSD, you must have the refreshed version of VoiceType 3.0 installed. To verify this information, check the header information in the README file of your installed VoiceType product. If it contains the information "IBM VoiceType Version 3.0 (960614) for Windows 95," then it is the correct version.

You can download the CSD in one of two forms:

• Self-installing file
• Diskette images file
  

Self-Installing File

To download and install the CSD, follow these steps:

1. Set up a temporary directory for the CSD.
2. By default, the name of the file is, CSD1_US.EXE.
3. After the CSD has completed downloading, install it by typing CSD1_US. The CSD will automatically install.

   Download Self-installing file

Diskette Images File

To download and install the diskette images of the CSD, be sure you have three blank diskettes available, then follow these steps:

1. Set up a temporary directory for the CSD.
2. By default, the name of the file is, CSD1_USI.ZIP.
3. After the CSD has completed downloading, type:

pkunzip -d CSD1_USI.zip

This will generate one file (CSD1GUID.DOC) and three subdirectories (DISK1, DISK2, and DISK3).

1. Insert a blank diskette in drive a:, then type:

copy disk1 a:

1. Repeat Step 5 for the disk2 and disk3 subdirectories, inserting a new blank diskette each time.

   Download Diskette images file