TMLNKS-WIN TMWE0140 TeamLinks Mail V4.0 for Windows ECO Summary

TITLE: TMLNKS-WIN TMWE0140 TeamLinks Mail V4.0 for Windows ECO Summary Copyright (c) Compaq Computer Corporation 1998. All rights reserved. Modification Date: 20-NOV-1998 Modification Type: New ECO Kit PRODUCT: TeamLinks V4.0 for Microsoft Windows [R] OP/SYS: Windows 95 Windows NT SOURCE: Compaq Computer Corporation ECO INFORMATION: ECO Kit Name: TMWE0140 ECO Kits Superseded by This ECO Kit: None ECO Kit Approximate Size: 6990 Blocks Kit Applies To: Windows 95 Windows NT V4.0 through Windows NT 4.0 with Service Pack 4 System/Cluster Reboot Necessary: No Kit Dependencies: The WinSock 2 update MUST be installed on all Windows 95 PCs, prior to installing TeamLinks 4.0 ECO#1. If PATHWORKS32 7.x is installed on your system, see the PATHWORKS32 Release Notes for information on installing the update. NOTE: Windows NT 4.0 comes pre-installed with WinSock 2, so TMWE0140 can be directly installed on these systems. ECO KIT SUMMARY: An ECO kit exists for TeamLinks V4.0 for Microsoft Windows 95 and Microsoft Windows NT. This kit addresses the following problems: Problems Addressed in TMWE0140: o Menu Editor Failure in Create Message Window o Opening an Excel spreadsheet from an existing TeamLinks session requires the user to log in again. o DOS-FC Switch for Office 97 ODMA Applications o TeamLinks FCLIST crash o Unable to save document changes for single instance applications in TeamLinks 4.0 o Cannot 'Create' or 'Reply' to messages when using an English version of TeamLinks on a French version of Windows 95/NT o Changing regional settings to any language other than English causes 'Create Message' function to fail o WordCorp Converter o Button Bar displays 'disabled' button o UMLAUT characters in addresses o Cover Memo Page Size for an RTF message is always Custom Size o Documentation Error in V4.0 Client Administration Guide -Specifying Alternate Port The TeamLinks 4.0 ECO #1 Kit contains fixes for the following TeamLinks components: XTIDNW32.DLL INFOMAN.EXE TLCONV32.OCX TLODMA32.DLL XTILIB32.DLL TLSETUP.EXE TLCNTRLS.OCX TLINTSEL.EXE TLCMN32.DLL CFCIOS32.DLL TLADDR32.OCX CFCX432.DLL RDASL32.DLL FCLIST.OCX TLWW8MAI.DOT TLINFO32.DLL LAUNCH.DLL TLMPPT97.PPA INSTALLATION NOTES: The user should have administrator rights before installing TeamLinks V4.0 ECO#1. If the user runs the Installation setup for TeamLinks 4.0 again in order to add certain components which were not selected in the previous 4.0 installation, ECO #1 will have to be re-installed to patch the newly installed binaries. The ECO Kit consists of two files, the cover letter (TMWE0140CVR.TXT) and a self-extracting archive file (TMWE0140.EXE). The self-extracting file expands into three files, DISK1.EXE, DISK2.EXE and DISK3.EXE that are also self-extracting. After expansion, install the ECO by running the SETUP.EXE file. Note that the multiple DISK files serve to break the kit up into diskette-sized components so that user can distribute the ECO to individual users on diskettes. After expansion, simply copy the contents of each DISK directory to a similarly labeled diskette. Installation Procedure ---------------------- 1. Extract the contents of TMWE0140.EXE into a temporary directory by performing the following tasks. If this ECO Kit has already been extracted into a shared area, or to diskettes, go to step 2. a. Exit to MS-DOS, if applicable, or just launch an MS-DOS window. b. Create a temporary directory (for example, C:\TLPATCH). C:\> MD TLPATCH c. Set the current directory to the temporary directory. C:\> CD TLPATCH d. Copy the self-extracting file TMWE0140.EXE to the temporary directory. e. Execute the self-extracting file. Be sure to include the file extension in the command. C:\TLPATCH> TMWE0140.EXE The following files are created in the temporary directory: DISK1.EXE DISK2.EXE DISK3.EXE f. Execute the first self-extracting DISK file. The /D qualifier is required for the creation of subdirectories. C:\TLPATCH> DISK1 /D g. Execute the second self-extracting DISK file using the /D qualifier to create subdirectories. C:\TLPATCH> DISK2 /D h. Execute the third self-extracting DISK file using the /D qualifier to create subdirectories. C:\TLPATCH> DISK3 /D The ECO installation kit has been created in the subdirectories \DISK1 \DISK2 and \DISK3 in the temporary directory. i. Return to the Windows operating system to install the ECO. The files TMWE0140.EXE, DISK1.EXE, DISK2.EXE and DISK3.EXE can now be deleted as they are no longer required. 2. Complete the ECO installation by executing the command sequence below that is appropriate to the operating system: For Windows 95 and Windows NT V4.0: Setup will determine if TeamLinks is installed as a Network Shared Copy or as a Local Copy and will patch the necessary files accordingly. NOTE: In the case of a Network Shared Copy, once the network files have been updated with this ECO, re-install TeamLinks on each client PC by running the normal SETUP.EXE file located in the SETUP directory of the Network Shared Copy. i. Prior to running the patch installation, shut down all applications that may be running. ii. Select the Run command from the Start menu. iii. Enter the full path of the SETUP.EXE program located in the temporary directory created in step 1 then click OK. Open: C:\TLPATCH\DISK1\SETUP.EXE iv. Follow the prompts on the screen to complete the installation.

This patch can be found at any of these sites:

Files on this server are as follows:

tmwe0140.README
tmwe0140.CHKSUM
tmwe0140.CVRLET_TXT
tmwe0140.exe