APPOPT AO20A01INT Application Optimizer V2.0A WNT Intel ECO Summary
TITLE: APPOPT AO20A01INT Application Optimizer V2.0A WNT Intel ECO Summary
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
Modification Date: 20-DEC-1999
Modification Type: New Kit
PRODUCT: Compaq Application Optimizer V2.0A
Windows NT (Intel)
OP/SYS: Windows NT V4.0
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: AO20A01INT
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 12068 Blocks
AO20A01INT.EXE 12068 Blocks
Kit Applies To: Application Optimizer V2.0A
Windows NT (Intel)
System/Cluster Reboot Necessary: Unknown
Rolling Re-boot Supported: Unknown
Installation Rating: INSTALL_Unknown
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for Application Optimizer V2.0A on Windows NT (Intel)
V4.0. This kit addresses the following problems:
o If the environment variable stdl_log_file is set to an
invalid value, i.e. the directory path is invalid, the
application could hang when trying to do logging.
o On WindowsNT, if error logging is done to the Event Log,
the translation of the runtime error codes could fail.
This would occur only if a previous installation of
Application Optimizer was manually uninstalled, and the
uninstall utility was not used.
INSTALLATION NOTES:
Installation of this kit requires that Application Optimizer Version
2.0A for Windows NT be present on the system prior to installing the ECO.
This installation does not ask for any product install keys.
Copy the following product/platform specific executable to a clean
folder and run it.
e.g. Intel compatible PC running Windows NT
>cd c:\clean-folder
>ao20a01int.exe
After running the executable, go to the intel32 directory and
execute Setup.exe.
Restrictions and Requirements:
* Installation of ECO kit will update all TPware Product Suite
products (Application Optimizer for Windows NT, Portable TP for
Windows NT, TP Desktop Connector and TP Web Connector) currently
installed on the system. It is not necessary to perform a
separate installation for each TPware product installed on the
system.
* After installing the ECO, if your application uses the Microsoft RPC
(msrpc) adapter, the DCE (dce) adapter, or the ACMS Gateway (acmsda)
adapter, you must recompile your task group specification (STDL file)
and relink with your client.
* Please refer to Release Notes for installation restrictions
and guidelines.
All trademarks are the property of their respective owners.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
ao20a01int.README
ao20a01int.CHKSUM
ao20a01int.CVRLET_TXT
ao20a01int.exe
ao20a01int.CVRLET_TXT
|