MSMAIL_DRVR DDME0117 Digital Driver for Microsoft Mail V1.7 ECO Summary

 
Copyright (c) Digital Equipment Corporation 1997.  All rights reserved.

PRODUCT:    Digital Driver for Microsoft Mail                  
                  
OP/SYS:     Microsoft Windows 3.1 and Windows for Workgroups 3.11

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  DDME0117
     ECO Kits Superseded by This ECO Kit: None
     ECO Kit Approximate Size:  6000 Blocks
     Kit Applies To:  Digital Driver for Microsoft Mail 
                      Microsoft Windows 3.1 and Windows for Workgroups 3.11
     System/Cluster Reboot Necessary:  No


ECO KIT SUMMARY:

An ECO kit exists for Digital Driver Version 1.7 for Microsoft Mail 
on Microsoft Windows V3.1 through Windows for Workgroups V3.11.  This 
kit addresses the following problems: 

    o  When creating a message, if the personal name is set,
       it is not being sent with the message.  

    o  High priority messages are not being marked high priority.

    o  Multiple parentheses in an address causes an error on upload.  

INSTALLATION NOTES:

Installation Overview:
----------------------

NOTE:  If this ECO kit has already been extracted, then go to step 2.

1.  From MS-DOS, extract the contents of DDME0117.EXE into a temporary
    directory by performing the following tasks.

        a.  From MS-DOS, create a temporary directory (e.g. C:\KIT).

                C:>MD KIT

        b.  Set your current directory to the temporary directory which
            you created.

                C:>CD KIT

        c.  Copy the self-extracting file to this directory.

        d.  Execute the self-extracting file.   Be sure to include the
            file extension in the command.

                C:\KIT> DDME0117.EXE /D
                                                  
            NOTE: The /D is required for the creation of subdirectories.

            The following files/directories are created in the temporary
            directory:

                DDME0117.CVR - This cover memo
                DISK1.DIR
                DISK2.DIR
                DISK3.DIR

            The ECO installation kit has been created in the subdirectories
            \DISK1, \DISK2, and \DISK3 in your temporary directory.

2.  To complete the ECO installation, return to Windows.  From the
    File Manager, locate SETUP.EXE in the DISK1 subdirectory created
    in the temporary directory or on the DISK1 diskette and double click.  
    Follow the prompts on the screen to install the Digital Driver.

Colorado Site
Georgia Site

ddme0117.README
ddme0117.CHKSUM
ddme0117.CVRLET_TXT
ddme0117.exe