OpenVMS VAXCLIU09_062 VAX V6.2 SHWCLSTR ECO Summary

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 
Copyright (c) Digital Equipment Corporation 1997, 1998.  All rights reserved.

PRODUCT:    OpenVMS VAX

COMPONENT:  CLIUTL - SHWCLSTR.EXE

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  VAXCLIU09_062
     ECO Kits Superseded by This ECO Kit:  VAXCLIU05_062 
     ECO Kit Approximate Size:  180 Blocks
     Kit Applies To:  OpenVMS VAX V6.2
     System/Cluster Reboot Necessary:  No

     Installation Rating:  2 - To be installed on all systems running
                               the listed version(s) of OpenVMS and
                               using the following feature(s):

                                    Systems running in a cluster.

     NOTE:  In order to receive the full fixes listed in this kit,
            the following remedial kits also need to be installed:

                 None


ECO KIT SUMMARY:

An ECO kit exists for the DCL command 'SHOW CLUSTER' (SHWCLSTR) on
OpenVMS VAX V6.2.  This kit addresses the following problems: 

Problems Addressed in the VAXCLIU09_062 Kit:

  o  The VAXCLIU05_062 remedial kit did not fully correct the
     problems listed.  This kit contains all the fixes.


Problems Addressed in the VAXCLIU05_062 Kit:

  o  System crashes with a PGFIPLHI, Pagefault with Interrupt Priority
     Level (IPL) too high, after entering a SHOW CLUSTER/CONT command
     and adding PORT class information. 

          Crash FOOTPRINT: From SDA> CLUE CRASH

          Crash Time:        28-APR-1997 09:41:36.33
          Bugcheck Type:     PGFIPLHI, Pagefault with IPL too high
          Node:              XXXX  (Clustered)
          CPU Type:          VAX 8400 
          VMS Version:       V6.2
          Current Process:   XXXX
          Current Image:     $1$DUA50:[SYS4.SYSCOMMON.][SYSEXE]SHWCLSTR.EXE
          Failing PC:        00000000 00061080
          Failing PS:        2C000000 00000803
          Module:            SHWCLSTR
          Offset:            00061080

  o  Modified date and time format for the SHOW CLUSTER utility.  Signed
     integer fields can now be displayed. 

  o  For date/time display elements, the SHOW CLUSTER command shows only
     the last two digits of the year.  This can be seen by executing 
     any of the following 'Add' commands in SHOW CLUSTER/CONTINUOUS: 

          SHOW CLUSTER/CONTINUOUS
          Add> ADD FORMED
          Add> ADD LAST_TRANSITION
          Add> ADD TRANSITION

     If the system time is set to sometime in the year 2000, the year
     is displayed as "00". 

     This change allows year to be displayed as a full four digit number.


INSTALLATION NOTES:

The system does not need to be rebooted after this kit is installed.
However, if you have other nodes in your OpenVMS VMScluster, they should
be rebooted or you should install this kit on each system in order to


This patch can be found at any of these sites:


Colorado Site


Georgia Site




Files on this server are as follows:

vaxcliu09_062.README
vaxcliu09_062.CHKSUM
vaxcliu09_062.CVRLET_TXT
vaxcliu09_062.a-dcx_vaxexe