SNA_TE SNATE_E02016 DECNET/SNA Terminal Emulator V1.6 ECO Summary

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 
Copyright (c) Digital Equipment Corporation 1997.  All rights reserved.

PRODUCT:    DECnet SNA 3270 Terminal Emulator for OpenVMS V1.6

OP/SYS:     OpenVMS VAX
            OpenVMS Alpha

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  SNATE_E02016
     ECO Kits Superseded by This ECO Kit:  SNATE_E01016
     ECO Kit Approximate Size:  1930 Blocks
                    Saveset A - 1926 Blocks

     Kit Applies To:  DECnet SNA 3270 Terminal Emulator for OpenVMS V1.6
                      OpenVMS VAX V6.1, V6.2, V7.0, V7.1
                      OpenVMS Alpha V6.1, V6.2, V7.0, V7.1

     System/Cluster Reboot Necessary:  No


ECO KIT SUMMARY:

  NOTE: SNATE_E02016 is the release of DECnet SNA 3270 Terminal Emulator
        certified for OpenVMS VAX and OpenVMS Alpha versions V7.1. The 
        installation process was modified to permit installation on OpenVMS 
        VAX and OpenVMS Alpha version V7.1 systems.

An ECO kit exists for DECNET/SNA Terminal Emulator for OpenVMS V1.6
on OpenVMS V6.1 through V7.1.  This kit is built with SNAAI V2.4
ECO-02 which includes fixes for the following problems:

  o  GAI_CLOSE would not deallocate channels on abnormal disconnects.
     The sna__rcv_callback routine now deallocates the channels.

  o  The pacing indicator was never being set on the first request
     RH in the pacing window when data was sent to the host.
     This has now been corrected in the SNA__PAC_RQ_SEND routine.

  o  Pacing was not working properly when a pacing value was specified.
     This has been corrected in the sna__tc_dequeue_q_pac by checking
     if pacing_count is greater than zero.  Previously, pacing_window
     was being checked in error.
                                  

INSTALLATION NOTES:

This ECO kit is installed with the VMSINSTAL command procedure.

After the installation is completed the product should be restarted
per the User's Guide installation instructions, to make the new
software active.

To make the terminal emulator shareable each time the system reboots, 
you must add the following line to your system startup procedure:

                $ @SYS$STARTUP:SNATE$STARTUP

Colorado Site
Georgia Site

snate_e01016.README
snate_e02016.CHKSUM
snate_e02016.CVRLET_TXT
snate_e02016.a-dcx_axpexe
snate_e02016.a-dcx_vaxexe