*SNALU62] SNALU62_E01023 DECnet/SNA OpenVMS LU6.2 API V2.3 ECO Summary

 
NOTE:  An OpenVMS saveset or PCSI installation file is stored
       on the Internet in a self-expanding compressed file.
       The name of the compressed file will be kit_name-dcx_vaxexe
       for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
 
       Once the file is copied to your system, it can be expanded
       by typing RUN compressed_file.  The resultant file will
       be the OpenVMS saveset or PCSI installation file which
       can be used to install the ECO.
 
Copyright (c) Digital Equipment Corporation 1997.  All rights reserved.

PRODUCT:    DECnet SNA APPC/LU6.2 Programming Interface for OpenVMS

OP/SYS:     OpenVMS Alpha V6.1, V6.1-1H1, V6.1-1H2,                          
                          V6.2, V6.2-1H1, V6.2-1H2, V6.2-1H3                 
                          V7.0                                               
            OpenVMS VAX V6.1, V6.2, V7.0                                      

SOURCE:     Digital Equipment Corporation

ECO INFORMATION:

     ECO Kit Name:  SNALU62_E01023
     ECO Kits Superseded by This ECO Kit:  None 
     ECO Kit Approximate Size:  13,788 Blocks
     Kit Applies To:  DECnet SNA APPC/LU6.2 Prog. Interface for OpenVMS
                      OpenVMS Alpha V6.1, V6.1-1H1, V6.1-1H2,
                                    V6.2, V6.2-1H1, V6.2-1H2, V6.2-1H3
                                    V7.0
                      OpenVMS VAX V6.1, V6.2, V7.0
     System/Cluster Reboot Necessary:  Yes
     Installation Rating:  N/A
     NOTE:  In order to receive the full fixes listed in this kit,
            the following remedial kits also need to be installed:

                 None 


ECO KIT SUMMARY:

An ECO kit exists for DECnet/SNA APPC/LU6.2 on OpenVMS V6.1 through 
V7.0.

  o  The LU-LU Session-Level Security Verification has not functioned
     properly since the base level release. This kit corrects it.

     Fixed a design problem whereby the LU6.2 interface continuously
     issues low level receives once the first LU6.2 interface receive
     call is made. Low level receives will be suspended when there is
     no outstanding call to LU6.2 interface receives by the application.

     This kit has been built with updated (V2.4 ECO-02) SNAAI (newAI)
     protocol support layers in order to fix: deallocating channels
     properly, setting the pacing indicator correctly.


INSTALLATION NOTES:

The installation procedure for the DECnet SNA OpenVMS APPC-LU6.2
Programming Interface will install SNALU62SHR.EXE and SNALU62MG.EXE
as shareable images.

To install the APPC-LU6.2 on other nodes that share a common system
disk in a cluster environment, run the SYS$MANAGER:SNALU62$STARTUP.COM
command procedure on each node.

For nodes in a cluster environment that do not share a common system
disk, APPC-LU6.2 will have to be installed on each node.

Verification of the installation can be done either during installation
through the VMSINSTAL utility or at any other time by running the
SNALU62$IVP.COM command procedure found in SYS$TEST.  This command
procedure only verifies that the APPC-LU6.2 has been installed
correctly on your system.  It does not verify connectivity to the 
IBM via the DECnet SNA Gateway or VMS/SNA.

Colorado Site
Georgia Site

snalu62_e01023.README
snalu62_e01023.CHKSUM
snalu62_e01023.CVRLET_TXT
snalu62_e01023.a-dcx_axpexe
snalu62_e01023.a-dcx_vaxexe