SNA_DTF SNADTFM_E14031 DECnet SNA Data Transfer Facility V3.1 ECO Summary
TITLE: SNA_DTF SNADTFM_E14031 DECnet SNA Data Transfer Facility V3.1 ECO Summary
Modification Date: 26-OCT-1999
Modification Type: Updated ECO kit - Supersedes SNADTFM_E13031
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
PRODUCT: DECnet SNA Data Transfer Facility (DTF) for MVS
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: SNADTFM_E14031
ECO Kits Superseded by This ECO Kit: SNADTFM_E13031
SNADTFM_E12031
SNADTFM_E11031
SNADTFM_E10031
SNADTFM_E9031
SNADTFM_E8031 (CSCPAT_5037)
SNADTFM_E7031
SNADTFM_ECO6031
SNADTFM_ECO5031
SNADTFM_ECO4031
SNADTFM_ECO3031
SNADTFM_MUPA031
SNADTFM_S2031
SNADTFM_S1031
ECO Kit Approximate Size: 5922 Blocks
Kit Applies To: DECnet/SNA Data Transfer Facility for MVS V3.1
System Reboot Required: No
ECO KIT SUMMARY:
An ECO kit exists for DECnet/SNA DTF for MVS V3.1.
PROBLEMS ADDRESSED BY SNADTFM_E14031:
DTF for MVS will release PTF kits which fix all known problems to
date. The kits are cumulative, ie. SNADTFM_E14031 will have all
the fixes that SNADTFM_E13031 has in addition to the fixes made
to that kit.
Note: A description of all corrections are included in the second
file on the PTF tape. Details on accessing this file are
included in the PTF INSTALLATION INSTRUCTIONS section.
PROBLEMS ADDRESSED BY SNADTFM_E13031:
DTF for MVS will release PTF kits which fix all known problems to
date. The kits are cumulative, ie. SNADTFM_E13031 will have all
the fixes that SNADTFM_E12031 has in addition to the fixes made
to that kit.
Note: A description of all corrections are included in the second
file on the PTF tape. Details on accessing this file are
included in the PTF INSTALLATION INSTRUCTIONS section.
Problems addressed by the SNADTFM_E12031 kit:
o DTF unable to handle 8 character userid when running DTF
batch IBM initiated jobs.
o DTF unable to extract creation and expiration dates from
catalog using DSETCRDT and DSETEXDT. Changed names to
DSCRDT2 and DSEXDT2.
MUST APPLY for datasets with dates > year 2000.
o DTF unable to display correct TCC extension messages.
Msg 152 displays first 7 characters of APPLID name.
Problems addressed by the SNADTFM_E11031 kit:
o VMS users issuing directory requests of large PDS sometimes
result in a DME error. DTF does not release the dataset.
Future DTF requests for the dataset returns File Currently
locked status message.
o Dates after December 31, 1999 are incorrectly displayed.
Incorrect calculations result in each month starting at
the second instead of the first. Each month has an extra
day. This PTF fixes the displayed dates.
o All logging and smf records using the Cyyddd format follow
IBM's solution by making the C the number of centuries
since 1900. On January 1, 2000, the date is represented as
100001. SMF and logging records are correct without applying
this PTF.
o DTF Shutdown command results in an 0C4 abend on OS/390
systems. OS/390 required AM=VTAM on the TESTCB macro.
o DTF could not locate any UCB's above the 16 meg line.
Added LOC=ANY to UCBSCAN macro.
Problems addressed by the SNADTFM_E10031 kit:
o Installations configuring dasd with four byte UCB addresses will
experience errors when copying to or from MVS.
o If the DTF started task abends with a S722 then the SSI may not be
be available on restart. This PTF corrects the problem by allowing
DTF to close the SSI and terminate cleanly.
o DTF returns file currently locked during directory processing if
the file resides on a non-SMS managed volume and the device is
allocated to a four byte UCB. This PTF corrects the problem and
allows member information to be returned.
o DTF should not terminate on an abend S314.
o DTFSAF should point after length field in REQSTOR parameter. Also,
remove APPL= parameter from the ENVIR=DELETE call.
Problems addressed by previous ECO kits that are also addressed by the
current ECO kit:
o Users running TSO V2.3 will experience a S0C4 abend when invoking
help from the DTF Command Processor. IBM message IKJ56810I may
also be displayed. This PTF changes the method of calling IBM's
help module to prevent addressing mode conflicts.
o The Client node name was not displayed on the Query screen during a
non-recoverable IBM initiated transfer.
o The ISPF clists have been updated to prevent DTFUSER parms options
from being overridden unless they are filled in by the user.
o This PTF updates module DTFSTAMP. This module contains the last
PTF number applied. This number is sent as part of the bind and is
visible in the VMS/DTF SNATRCFIL.LOG file for debugging purposes.
o Field LDH$TIME is stored in every logging record. The field is not
computing hundredths of seconds properly and which causes the value
to not be accurate.
o MSG DTF0340I is written to the log when a server session is shut
down. The time field is not being written properly.
o DTF is not counting DELETE/LOG requests as delete requests. As a
result the logging field LDJE$FILES_DELETED may not be correct.
o The field LDSE$SEND_HIGH, which gives the high water mark on the
send queue, has incorrect data in it.
o RFA access allows DECnet programs to access records in IBM files by
address. Installations performing translation on the IBM system
will receive record deleted messages when performing RFA access
against VSAM indexed files.
When translating data on the IBM system, DTF is not performing
key translation properly during RFA access.
o The 'no block span' attribute tells RMS that records cannot
span blocks. DTF was rejecting this attribute when a user
attempted to send a file with this attribute to the IBM system.
When writing format V files DTF for MVS, by default, writes
non-spanned records. This PTF corrects the problem by ignoring the
attribute.
o VFC (variable with fixed control) files are RMS files that contain
fixed length headers. The record size was not being calculated
properly for VFC files.
o This PTF updates module DTFSTAMP. This module contains the last
PTF number applied. This number is sent as part of the bind and is
visible in the VMS/DTF SNATRCFIL.LOG file for debugging purposes.
o IBM initiated transfers submitted through batch may override
the IBM userid assigned to the transfer by defining the
IBM userid and password in the transfer request. When this
is done the transfer fails with a privilege violation.
o CRC errors may be reported when transferring files to the IBM
system. It is possible, in a multiprocessor environment for
the VTAM receive RPL exit to run concurrently with the mainline
logic. The result is that an inbound RU may be dropped from
the queue.
o Installations may configure DTF to load there own customized
jobsecurity exit. If the installation codes the JOBSECURITYEXIT
nodeparm and the exit can not be loaded at DTF startup time then
the job submission feature is not disabled. The result is that
requestors may still be allowed to submit jobs and security will
not be maintained. This PTF will turn off the job submit feature
if the exit cannot be loaded.
o Installations may configure DTF to supply a default IBM userid
for transfers. This is done by coding NODEPARMS PROXY(ON).
DTF does not assign the IBM userid until just prior to performing
the requested operation against the file (e.g. allocation).
HSM recall operations are performed prior to file allocation.
This means that if a file is HSM archived DTF will not have
performed the assignment and we can invoke the security exit
without an IBM userid. This PTF corrects the problem by
invoking the proxy logic prior to HSM recalls.
o Installations may be securing file accesses by volume name.
DTF may not be supplying to the security exit the correct volid
on an open existing request. PTF corrects problem by supplying
correct volume name.
o Installations may secure directory accesses by coding
NODEPARMS SECURITY(YES,DIR). If directory processing detects
a HSM archived file then directory processing reports back
to the requestor the filename without first calling the security
exit. PTF makes sure that DTF invokes the security exit for
HSM archived files during directory processing.
o Installations may secure recall requests by coding
NODEPARMS SECURITY(YES,HSM). If the security exit rejects
the recall operation the recall is still performed by DTF.
This PTF makes sure we recognize the return code back from
the security exit and reject the operation prior to the recall.
o This PTF correct a number of problems in a number of the sample
exits provided to the installation. Once the PTF is applied
the exits must be reassembled and link-edited to complete the
installation of the PTF. The PTF must be applied with the
BYPASS(HOLDSYSTEM(DOC)) keyword. The following is a list
of the fixes this PTF incorporates:
- Exits DTFSAF, DTFACF2, DTFRACF
- Exit DTFSAF
- Exit DTFPACF2
- Exit DTFPROXY
o Installations may configure DTF to only insert a USER= keyword
on job statements when a request arrives to DTF to submit a
batch job. To configure DTF to do so the NODEPARM JOBSECURITY
is set to USERID. If JCL is submitted by DTF and the job statement
already contains a USER= job statement keyword, DTF does not
override the userid with the IBM userid assigned to the transfer.
This PTF will remove the USER= value specified in the existing job
statement and insert the IBM userid assigned to the transfer.
Also supplied with this PTF is an updated DTFJOB submission exit.
This exit performs the same as the inline logic and can be
customized by the installation to meet specific needs or standards.
o If only /UNIT (and not /VOLUME) is supplied when attempting
to open an existing IBM file then the UNIT specification
is ignored. Customers may have files cataloged but would
still prefer to allocate using the UNIT specification. This
PTF will cause DTF to respect the /UNIT specification on a
request to open an existing IBM file.
o Update DTFSTAMP module to reflect current maintenance level.
o PC/NFT users performing COPY/BLOCK transfers of IBM resident files
DTF for MVS is not detecting end of network buffer. This causes DTF
for MVS to go into loop. Transfer appears hung and DTF CPU
consumption continues to increase.
o Installations experiencing network problems during file transfer.
When an error response is sent to DTF for MVS during a file
transfer, DTF processes the inbound data queue improperly. This
may cause an abend0C4 during session rundown.
o DTF may report back 0 size for IBM files when directory requests
are made.
Residual data in CB causes the problem. CB is not being
initialized properly.
o Installations using DCL BACKUP and /SMSx qualifiers
DTF was ignoring /SMSx qualifiers if specified in a BACKUP command.
Because DCL BACKUP does not pass allocation quantity, installations
want to use SMS data classes to specify default allocation
quantity. PTF allows /SMSx to be honored.
o Users performing a transfer operation using the /CONTIG qualifier
or transferring a file with the CONTIG RMS attribute.
Files transferred with the /CONTIG qualifier or containing the
CONTIG RMS attribute failed with VMS messages 'RMS-F-SUPPORT,
Network operation not supported' and 'RMS-F-FOP1, File processing
options field rejected'. This PTF allows DTF to ignore this option
instead of rejecting the transfer.
o Users performing an IBM initiated transfer to a remote DTF/VM
system using the proxy mechanism.
The transfer was rejected as a privilege violation because the
remote VM file specification included the /CORR qualifier. This
qualifier applies to the local file only on an IBM initiated
transfer and is removed by this PTF.
o DTF transfers initiated on the IBM system.
- The JOB name was incorrectly passed as the default remote userid
during a batch transfer if none was specified. Now the remote
userid defaults to that of the local userid.
- The value specified in the POST() keyword of the TRANSFER
command was uppercased. This caused problems when specifying
Ultrix files. The original case is now preserved.
o Users of the DTF ISPF Interface.
- DTF CLISTs were not passing correct CATALOG qualifier.
- NL (non-labeled) was note included in the list of allowable
options on the MVS Input and Output File Options panels.
o Users starting DTF from alternate consoles.
When DTF is started from an alternate console most DTF messages
appear only on the master console. This PTF alters that behavior so
all messages will also appear on the alternate console that DTF is
started from.
o Update module that reflects current maintenance level.
o It has been recommended that DTF for MVS not allocate new files
with the blksize parameter. The feature is being provided by this
PTF. To force DTF for MVS to not specify blksize during create of
a non-VSAM file specify
NODEPARMS FILEBLKSIZE(0)
in the startup file.
o An error prevented defining VSAM clusters with record sizes greater
than 9999. A invalid record size error may be reported.
o DTF for MVS does not support supersede of archived files. However,
if a vol is specified in the request then DTF does not report the
error and attempts to allocate the file to be superseded (as Step 1
of the supersede operation). This causes a mount for volume
'MIGRAT' to be issued. PTF will cause 'cannot supersede archived
file' to be reported and the mount will not occur.
o MVS/ESA 4.2 requires the use of the UCBSCAN macro to search for
devices that have been added through dynamic configuration. This
PTF provides this support.
o Update module that reflects current maintenance level.
o The /KEY qualifier is used to reorder VMS keys of reference (e.g.,
make IBM alternate key 2 be alternate key 1). Requestor gets
invalid key of reference when /KEY is included in the IBM
filespec.
o Return code of IBM initiated transfers is not being recorded in the
logging record that is written when the transfer runs down.
o If VSAM shareoptions is specified at the cluster level then it is
not propagated to the data component. This PTF corrects the
problem by explicitly specifying the shareoption value for the data
component.
o F$FILE_ATTRIBUTES can be used to determine the number of the last
used block in an existing file (by specifying the EOF parameter).
DTF does not return the value required and F$FILE reports back a
value of -1. This PTF corrects the problem by returning the
necessary value.
o DTF returns file not found when an access to an uncataloged
dataset is attempted.
o Requestors using PC NFT COPY can specify a VFC value on the command
line. Specifying a VFC value that exceeds record size puts the DTF
output routine into a loop. This PTF corrects the problem and
causes DTF to return a record size error.
o Update module that reflects current maintenance level.
o If PASSWORD=(oldpass,newpass) is specified in JCL, DTF does not
parse correctly and a JCL error is produced as a result of the
submit. Fix is to accept this syntax.
o Ultrix DCP users do not have the ability to specify maximum record
size for files being sent to the IBM mainframe. /MRS file
specification qualifier gives this capability.
o If DTF/VTAM is not authorized to delete a file then an abend0C4
results. Fix prevents abend from occurring.
o When WORKQUALIFIER NODEPARM causes temp filespec length to exceed
44 characters an abend0C2 results due o a bad branch. Fix removes
abend0C2.
o Default logon id not found because of an error in the DTFPROXY
routine. Fix corrects error.
o If an error occurs during wildcard DIR processing the output is
terminated. This PTF allows the dir output to proceed. However,
this recovery logic will not be driven until a subsequent release
of OpenVMS for errors of the type RMS$_DTFACC.
o Update module that reflects current maintenance level.
o DTF is not reporting file locked on PDS files when a member name
search is made on a directory access and the PDS is locked by
another address space. Fix is to return file locked by another
user.
o DECnet Applications using record level access to access a VSAM RRDS
by relative record number cannot access records with a relative
record number greater than 255. Fix is to change keyed access to
RRDS files such that all records can be accessed.
o DTFSAF exit is not returning correct return code when a proxy
access is made during directory processing. Error can cause
directory information to be returned even though proxy is not
allowed. Fix is to ensure proper return code is returned to
mainline.
o Update module that reflects current maintenance level
o Users receiving VMS/RMS i/o error msg when trying to read records
from a VSAM ESDS using record level access. PTF corrects the
problem.
o DTF is not parsing jobcards properly when they include comment
strings. Also, jobcards are not parsed correctly if the jobcard
spans multiple records and there is a comment record inserted
between jobcard continuation statements.
o Supersede logic is not working properly when MVS file exists on
on a dynamically defined device.
o Update module that reflects current maintenance level.
o DTF for MVS is not honoring the MVS stop command. This PTF
corrects the problem and also updates DTFSTAMP, the module that
reflects the current maintenance level. If multiple requests are
received, to allocate a +1 generation of the same gdg by DTF for
MVS, data can get overwritten. The fix is to return "file locked
by another user" on the subsequent attempts to create a +1
generation.
o DTF suffers an abend714 when a tape that DTF is writing to is
unloaded prematurely. This PTF suppresses the abend714 dump and a
close failure is signaled to the requestor.
o Requestors issuing DCL SUBMIT/REMOTE may receive wrong length
record if a jobcard is continued by placing a comma in column 70 of
the jobcard. This PTF corrects the problem and allows the JCL to
be submitted.
o When host translation is specified and the requestor specifies the
name of a translate table, via the /TRANS qualifier, the table is
sent from the VMS server system to the mainframe. The storage
allocated for the table is not released at transfer termination.
o DTF does not terminate directory requests when wildcard searches
are performed from ULTRIX systems, via DLS.
o Transfers may not run down when send errors occur on sessions. The
effect is that the SNA session terminates but the mainframe
component still thinks the transfer is active. It appears to the
MVS operator that transfers are hung. The problem prevents normal
shutdown of the system from occurring. This PTF causes the send
error to terminate the transfer so that DTF does not need to be
canceled to shutdown.
o AbendA78 may result if DTF does not shutdown the subsystem
interface properly during a previous execution. This PTF
eliminates the abendA78. Note that this will allow DTF to restart
but the subsystem interface will be unavailable (i.e., IBM
initiated requests will not be honored).
o The resource task, which is events driven, is not allocating an
events table large enough to accomodate MAXTRANSFERS. PTF fixes
problem by causing DTFRSRC to use MAXTRANSFERS to calculate table
size.
o DTF may use excessive amounts of virtual storage (Subpool 101)
and cause transfers to fail with out of memory errors. This
PTF prevents the problem from occurring.
o DTF allocates JCL files as old during submit/remote processing.
This may cause submit requests to fail if JCL files are allocated
to other users. Since exclusive access is not required, this PTF
alters access from DISP OLD to DISP SHR.
o Issuing DCL COPY/REPLACE to replace an existing GDG element
results in an abend0C4. This fix eliminates the abend. Note,
however, that DTF only allows non-SMS managed GDG elements
to be replaced.
o The F$FILE_ATTRIBUTES call no longer ships the file access type
and this required DTF to default to read access. DTF was rejecting
the access. DTF will now honor the request.
o The DTF/ISPF interface is not sending the name of the alternate
translate table. This PTF corrects the problem.
o Abend0Cx may result when using the DTFSAF exit because it does
not provide its' own savearea. RACROUTE calls cause our
preformatted save area chain to be corrupted and this can
cause abends. DTFSAF now acquires a save area and this
prevents subsequent abends.
Please refer to the Release Notes supplied with this ECO for more
details.
NOTE: The Release Notes are supplied in the second file on the PTF
tape. Creation of the PTF file is described in the INSTALLATION
NOTES section of this article as well as in the ECO Cover Letter.
INSTALLATION NOTES:
Note: If this ECO is obtained on tape media, it will be in
IBM readable format and ready to install as described
in the PTF INSTALLATION INSTRUCTIONS section.
If it is obtained electronically, the PTFs are distributed
in an OpenVMS saveset. Please refer to the INSTALLATION TO
BUILD DTF for MVS PUT TAPE section for instructions
on how to build a MVS PUT tape before proceeding to the
PTF INSTALLATION INSTRUCTIONS section.
INSTRUCTIONS TO BUILD DTF for MVS PUT TAPE FROM THE OpenVMS SAVESET
(Assuming tape drive is $2$MUA0 in the following example)
$! Move saveset to temporary directory.
$! COPY device:SNADTFM_E14031.A []
$ DELETE TMP.TMP;*
$ MOUNT $2$MUA0:/FOREIGN/BLOCK=32000/DENSITY=6250
$ BACKUP SNADTFM_E13031.A/SAVE []
$ COPY TMP.TMP;* $2$MUA0:
$ SET MAGTAPE $2$MUA0:/REWIND
$10:
$ F = F$SEARCH( "TMP.TMP;*", 1 )
$ IF F .EQS. "" THEN GOTO 20
$ DIFF 'F' $2$MUA0:
$ GOTO 10
$20:
$ DISMOUNT $2$MUA0:
$ DELETE TMP.TMP;*
Then label this tape as follows:
+-----------------------------------------------+
| DECnet/SNA DTF for MVS V3.1 PTF TAPE |
| FORMAT: SMP PUT CREATE DATE: |
| DENSITY: 6250 LABEL: NL |
+-----------------------------------------------+
PTF INSTALLATION INSTRUCTIONS
All steps listed here assume the existence of cataloged
procedure SMPDTF which should have been created during
the installation of DTF for MVS.
Note: File 2 on the PTF tape contains descriptions for each of
the PTFs. Use the sample JCL listed below to print this
file.
//PRTPTF JOB ,'PRINT PTF',MSGCLASS=X,CLASS=A
//STEP1 EXEC PGM=IEBGENER,REGION=1024K
//SYSPRINT DD SYSOUT=*
//SYSUT1 DD DSN=DTF.TAPE,
// UNIT=TAPE,VOL=SER=DTFTPE,
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200),
// DISP=(OLD,KEEP),LABEL=(2,NL)
//SYSUT2 DD SYSOUT=*
//SYSIN DD DUMMY
//
STEP 1 - RECEIVE The DTF for MVS PTF'S
Use the sample JCL listed below to receive DTF for MVS
service.
//RECVDTF JOB ,RECEIVE,MSGCLASS=X,CLASS=A
//*****
//***** RECEIVE DTF SERVICE
//*****
//STEP1 EXEC SMPDTF
//SMP.SMPCNTL DD *
SET BDY(GLOBAL).
RECEIVE SYSMODS LIST.
/*
//SMP.SMPPTFIN DD DSN=SMPPTFIN,DISP=(OLD,KEEP),
// VOL=SER=DTFTPE,LABEL=(1,NL),UNIT=TAPE,
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200)
//
STEP 2 - CHECK FOR APPLICABLE HOLDDATA
DTF for MVS uses SMP HOLDDATA to inform you when a compo-
nent that requires special maintenance handling is be-
ing changed. These components are treated as requiring
HOLDDATA:
o Changes to DTF for MVS/ISPF panels, messages or CLISTs
which will require an update to the ISPF libraries.
o Changes to DTF exits that may have been customized by the
installation.
STEP 3 - APPLY THE DTF for MVS PTF'S
Use the sample JCL listed below to apply DTF for MVS cor-
rective service.
//APPLPTF JOB ,'APPLY DTF',MSGCLASS=X,CLASS=A
//*****
//***** APPLY DTF CORRECTIVE SERVICE
//*****
//STEP1 EXEC SMPDTF
//SMP.SMPCNTL DD *
SET BDY(DTFTZN) .
APPLY PTFS .
//
If any PTFs are held then the BYPASS keyword must be
used on the APPLY command to allow those PTFs to be
applied.
STEP 4 - COPY DTF for MVS/VTAM and DTF for MVS TSO CORRECTIVE
SERVICE TO SYSTEM LIBRARIES
If your site executes DTF for MVS/VTAM and/or DTF for MVS TSO
from STEPLIB datasets to the DTFVLOAD and DTFTLOAD
datasets then skip this step.
If your site modified the installation jobs to include
SMP usermods to update the DTF target zone for the new
location of the DTF for MVS load modules, then skip this
step.
Otherwise, you must now re-submit the jobs to copy
DTF/VTAM and DTF/TSO components to system libraries.
These are located in the original DTF for MVS installation
dataset.
STEP 5 - DO HOLDDATA REQUIREMENTS
If there were any PTFs with HOLDDATA you must do the
special requirements of those PTFs at this time.
STEP 6 - STOP AND RESTART DTF for MVS JOBS
DTF for MVS/VTAM must be stopped and restarted so that an up-
dated version of the programs gets loaded. Any current
TSO users will not have the updated DTF for MVS TSO pro-
grams unless they logoff and log back on.
STEP 7 - TEST DTF for MVS
Always test the production jobs which use DTF for MVS to
insure that the corrective service fixes the prob-
lems. Do not proceed to the next step if the existing
problem is not corrected or if a new problem has been
introduced.
STEP 8 - ACCEPT DTF for MVS PTF'S
Only do this step after you have verified that DTF for MVS
performs in a satisfactory manner. Use the sample JCL
listed below to accept DTF for MVS corrective service.
//ACCPTF JOB ,'ACCEPT DTF',MSGCLASS=X,CLASS=A
//*****
//***** ACCEPT DTF CORRECTIVE SERVICE
//*****
//STEP1 EXEC SMPDTF
//SMP.SMPCNTL DD *
SET BDY(DTFTZN) .
ACCEPT PTFS .
//
If any PTFs are held then the BYPASS keyword must be
used on the ACCEPT command to allow those PTFs to be
accepted.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
snadtfm_e14031.README
.CHKSUM
snadtfm_e14031.a-dcx_axpexe
snadtfm_e14031.a-dcx_vaxexe
snadtfm_e14031.CVRLET_TXT
|
