SEARCH CONTACT US SUPPORT SERVICES PRODUCTS STORE
United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
gears
compaq support options
support home
software & drivers
ask Compaq
reference library
support forum
frequently asked questions
support tools
warranty information
service centers
contact support
product resources
parts for your system
give us feedback
associated links
.
} what's new
.
} contract access
.
} browse patch tree
.
} search patches
.
} join mailing list
.
} feedback
.
patches by topic
.
} DOS
.
} OpenVMS
.
} Security
.
} Tru64 Unix
.
} Ultrix 32
.
} Windows
.
} Windows NT
.
connection tools
.
} nameserver lookup
.
} traceroute
.
} ping
OpenVMS VMS721_VX1-V0100 Alpha 7.2-1 3DLabs Graphics Controller ECO Summary

TITLE: OpenVMS VMS721_VX1-V0100 Alpha 7.2-1 3DLabs Graphics Controller ECO Summary New Kit Date : 06-FEB-2001 Modification Date: Not Applicable Modification Type: New Kit NOTE: An OpenVMS saveset or PCSI installation file is stored on the Internet in a self-expanding compressed file. For OpenVMS savesets, the name of the compressed saveset file will be kit_name.a-dcx_vaxexe for OpenVMS VAX or kit_name.a-dcx_axpexe for OpenVMS Alpha. Once the OpenVMS saveset is copied to your system, expand the compressed saveset by typing RUN kitname.dcx_vaxexe or kitname.dcx_alpexe. For PCSI files, once the PCSI file is copied to your system, rename the PCSI file to kitname-dcx_axpexe.pcsi, then it can be expanded by typing RUN kitname-dcx_axpexe.pcsi. The resultant file will be the PCSI installation file which can be used to install the ECO. Copyright (c) Compaq Computer Corporation 2000. All rights reserved. OP/SYS: OpenVMS Alpha V7.2-1 COMPONENT: 3DLabs OXYGEN Graphics Controller SOURCE: Compaq Computer Corporation ECO INFORMATION: ECO Kit Name: VMS721_VX1-V0100 ECO Kits Superseded by This ECO Kit: None ECO Kit Approximate Size: 816 Blocks Kit Applies To: OpenVMS Alpha 7.2-1 System/Cluster Reboot Necessary: Yes Rolling Re-boot Supported: Yes Installation Rating: INSTALL_UNKNOWN Kit Dependencies: The following table lists information on which software kits are required to install 3Dlabs OXYGEN VX1 PCI Graphics Controller support on your Alpha platform. ----------------------------------------------------------------------------- OpenVMS Version | Required Kit(s) ----------------------------------------------------------------------------- V7.3 | No separate software kits are necessary. The 3Dlabs | OXYGEN VX1 PCI Graphics Controller support software | will be fully integrated into OpenVMS Version 7.3 ----------------------------------------------------------------------------- V7.2-1H1 | VMS721H1_VX1-V0100 (or later) | VMS721H1_UPDATE-V0300 (or later) | VMS721H1_CPU2208-V0100 (or later) ----------------------------------------------------------------------------- V7.2-1 | VMS721_VX1-V0100 (or later) | VMS721_PCSI-V0100 (or later) | VMS721_UPDATE-V0100 (or later) | VMS721_CPU2208-V0100 (or later) ----------------------------------------------------------------------------- V7.1-2 | VMS712_VX1-V0100 (or later) | VMS62TO71U2_PCSI-V0200 (or later) | VMS712_UPDATE-V0300 (or later) | VMS712_CPU2208-V0100 (or later) ----------------------------------------------------------------------------- Prior to V7.1-2 | 3Dlabs OXYGEN VX1 PCI Graphics Controller support | is not available on versions of OpenVMS prior to V7.1-2 Note: Where applicable the OpenVMS PCSI kit should be installed first. Installation order of any of the other kits is not important. ECO KIT SUMMARY: An ECO kit exists for 3Dlabs OXYGEN VX1 PCI Graphics Controller on OpenVMS Alpha V7.2-1. This kit addresses the following problems: Problems Addressed In VMS721_VX1-V0100: o Provide Functionality to enable use of the 3Dlabs OXYGEN VX1 PCI Controller two-dimensional (2D) support software INSTALLATION NOTES: The images in this kit will not take effect until the system is rebooted. If there are other nodes in the VMScluster, they must also be rebooted in order to make use of the new image(s). If it is not possible or convenient to reboot the entire cluster at this time, a rolling re-boot may be performed. o OpenVMS Version 7.3 Installation For OpenVMS Version 7.3 and higher, the 3Dlabs OXYGEN VX1 PCI Graphics Controller support software will be automatically loaded following installation Of OpenVMS and becomes active when the operating system is booted. No other action needs to be taken by the system operator. o OpenVMS Versions 7.1-2, 7.2-1, and 7.2-1H1 After the appropriate kits for your version of OpenVMS are downloaded, the 3Dlabs OXYGEN VX1 PCI Graphics Controller support software is installed by using the POLYCENTER Software installation utility. To install the kit, log into the SYSTEM account, and type the following command at the DCL prompt: PRODUCT INSTALL VMS***_VX1 /SOURCE=[location of Kit] *** = the version of OpenVMS that is running on the system, i.e. 712, 721 or 721H1. For example, for a V7.2-1H1 system you would enter the command: PRODUCT INSTALL VMS721H1_VX1 /SOURCE=[location of Kit] The location of the kit may be a tape drive, CD, or a disk directory that contains the kit. To install a PCSI or UPDATE kit, follow the installation directions included in that kit's Release Notes. If you ordered the 3Dlbas OXYGEN VX1 PCI Graphics Controller separately, then follow the additional instructions provided with the module to install the appropriate support software contained on the CD-ROM shipped with the module. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt. All trademarks are the property of their respective owners.



This patch can be found at any of these sites:

Colorado Site
Georgia Site



Files on this server are as follows:

dec-axpvms-vms721_vx1-v0100--4.README
dec-axpvms-vms721_vx1-v0100--4.CHKSUM
dec-axpvms-vms721_vx1-v0100--4.pcsi-dcx_axpexe
vms721_vx1-v0100.CVRLET_TXT

privacy and legal statement