ACMS V4.0 ACMSE02040 V4.0-2 for OpenVMS ECO Summary
Copyright (c) Digital Equipment Corporation 1994, 1995. All rights reserved.
PRODUCT: ACMS for OpenVMS
OP/SYS: OpenVMS VAX
OpenVMS Alpha
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: ACMSE02040
ECO Kits Superseded by This ECO Kit: ACMSECO01040
ECO Kit Size: Saveset A - 1,071 Blocks
Saveset B - 7,812 Blocks
Saveset C - 11,970 Blocks
Total of 3 files - 20,853 Blocks
Kit Applies To: ACMS V4.0 for OpenVMS
OpenVMS VAX V5.5 and higher
OpenVMS Alpha V1.5 and higher
System Reboot Necessary: No
ECO KIT SUMMARY:
An ECO kit exists for ACMS V4.0 for OpenVMS on OpenVMS VAX V5.5 and
higher and OpenVMS Alpha V1.5 and higher. This kit addresses the
following problems:
o The ACMEXCPAR.COM procedure will no longer fail when ADU is not
present.
o When using ACMS/ENTER/NORETURN with a DECforms menu, the terminal
will no longer hang.
o The debug symbol table will correctly be created by ADU on
OpenVMS Alpha.
o The compatibility problem between ACMS Version 4.0 and early
versions of ACMS Desktop has been corrected.
o Dumping a task group with the ADU will no longer abort With
SYSTEM-F-BADPARAM.
o Sub_Username item will now be reported in consistent format to
DECtrace.
o ADU will now name the default LSE diagnostic file correctly.
o ACMS operator commands will no longer hang while generating process
dumps.
o Missing ACMS symbols are now included in the OpenVMS VAX ACMSHR.EXE
as Universal.
o Invalid Buffer Length problem has been corrected.
o Protected Workspace problem has been corrected on OpenVMS Alpha.
o Ctrl/G will now work in the task debugger on OpenVMS Alpha.
o Terminal disabled on login problem has been corrected.
o When a user logs in on a controlled terminal, the CP no longer
dumps.
o Nonfatal internal error will no longer abort the CP.
NOTE: The incompatibility of ACMS V4.0 and DECforms V2.0 has been
addressed with the release of this ECO and a new version of
DECforms. This ECO provides support for DECforms V2.1
on OpenVMS VAX V6.1 and OpenVMS Alpha V6.1.
Please see the Release Notes supplied with this ECO for more details on
problems corrected as well as known problems and restrictions.
INSTALLATION NOTES:
This ECO kit requires that ACMS be shut down either before the
installation or automatically during the installation.
NOTE: For installation on a VAX/VMScluster, it is recommended that
ACMS be stopped on all cluster nodes prior to installation.
The system does not need to be rebooted after this kit is installed;
however, it will be necessary to run @SYS$STARTUP:ACMSTART.COM on all
nodes prior to restarting ACMS.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
acmse02040.README
acmse02040.CHKSUM
acmse02040.CVRLET_TXT
acmse02040.a-dcx_axpexe
acmse02040.a-dcx_vaxexe
acmse02040.b-dcx_axpexe
acmse02040.b-dcx_vaxexe
acmse02040.c-dcx_axpexe
acmse02040.c-dcx_vaxexe
|
