DUNIX KIT_DTF106 Data Transfer Facility V1.0 ECO Summary
TITLE: DUNIX KIT_DTF106 Data Transfer Facility V1.0 ECO Summary
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
Modification Date: 08-DEC-1999
Modification Type: Updated Kit Supersedes KIT_DTF104
PRODUCT: Data Transfer Facility Client V1.0
OP/SYS: Compaq Tru64 UNIX [R] (formerly DIGITAL UNIX)
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: KIT_DTF106
ECO Kits Superseded by This ECO Kit: KIT_DTF104
DTF103
DTF102
DTF101
ECO Kit Approximate Size: 2180 Blocks
KIT_DTF106.TAR - 2180 Blocks
Kit Applies To: Data Transfer Facility Client V1.0
DIGITAL UNIX V3.2 - Tru64 UNIX V5.0
System/Cluster Reboot Necessary: No
Installation Rating: INSTALL_UNKNOWN
This should be used if there is no information
in the documentation regarding the installation
rating of a kit.
NOTE: The KIT_DTF106 ECO kit is a cumulative kit which supersedes
the KIT_DTF104 ECO kit.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for Data Transfer Facility Client V1.0 on DIGITAL UNIX V3.2
through Compaq Tru64 UNIX V5.0. This kit addresses the following problems:
Problems addressed in KIT_DTF106
o Version id in all modules updated to "July 1, 1999, V1.0.6".
o DTD dispatcher now correctly creates new log files in response to
'dtfdsp new' command.
o Batch ( queued ) jobs are now processed in priority order.
Previously, the jobs were incorrectly processed in FIFO order.
o Error reporting and error message improvements for IBM initiated
transfers.
Problems addressed in KIT_DTF104
o The DTF/DU 'dispatcher' process sometimes terminated with no
error messages and no core dump.
o The DTF/DU 'dispatcher' did not attempt to re-establish an SNA
session with the mainframe when the mainframe was unavailable.
This limitation was documented in the release notes for the
origional product, but is now removed.
o Incorrect output was being produced by the 'dtfls' command when:
- the '-l' option was used on the command line to request
mainframe file size and date last modified
- the mainframe file had been 'migrated' to backup storage.
Instead of indicating that the file size and modification date
were not available, the dtfls command was using the file size and
modification date from the previous line of output. The 'dtfls'
command will now indicate that the file size and date are
unavailable.
Example:
dtfls -l joe.vt\*
DTFVOL 20-OCT-86 229376 JOE.VTX2.PLI
MIGRAT@ xx-xxx-xx x JOE.VTX4.PLI
16:47:09 DUN7518W '@' indicates volumes that are not mounted
o On IBM to Unix copies, a CRC check is now performed. Before this
ECO, the CRC was not being performed.
o Command DTFLS now supports -ll option to support four digit dates.
o IBM initiated copies no longer hang when using Tru64 UNIX V4.0x.
Problems addressed in previous ECOs:
o IBM initiated copies fail with error message
DUN9018E if "C2" enhanced security is in use
on the UNIX machine. This was corrected in
ECO 1, or kit DTF101. This kit contains this
correction as well.
o IBM to UNIX copies will sometimes fail with
message DUN7013E which indicates that there is
not enough space on the UNIX machine. This failure
happens when there is actually > 2 gigabytes
of available storage.
o DTFDU produced a core dump and terminated when receiving
large files with compression enabled.
o The -m flag on commands dtfui and dtfiu did not send
mail message to user when queued transfer completes.
o Minor errors in man pages dtfpr, dtfsb, and dtf.
INSTALLATION NOTES:
Installation procedure:
1. Delete previous version of DTFRUN10* and DTFMAN10*.
2. Un-tar kit_DTF106.tar
3. Use setld to install subsets DTFRUN106 and/or DTFMAN102
Example:
setld -d DTFRUN104 DTFMAN101
cd /tmp
mkdir temp
cd temp
tar xvf /blah/blah/kit_dtf106.tar
setld -l ./ DTFRUN106 DTFMAN102
Notes:
1. Do not use the IVP from previous versions of DTFRUN10* after
installing DTFRUN106. If attempted, error messages indicating
"not currently installed" will be displayed.
Use the DTFRUN106 IVP instead.
To execute the DTFRUN106 version of the IVP:
setld -v DTFRUN106
[R] UNIX is a registered trademark in the United States and other countries
licensed exclusively through X/Open Company Limited.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
kit_dtf106.README
kit_dtf106.CHKSUM
kit_dtf106.CVRLET_TXT
kit_dtf106.tar
kit_dtf106.CVRLET_TXT
|