AXPpci 33 Read Me ----------------- Files provided in this area are design_guide.ps --------------- August 1995 edition of the OEM Design Guide. The purpose of this guide is to provide system integration customers with the necessary design details of the motherboard so that they can integrate it into a standard or custom application. Covers both 166MHz and 233MHz operation. design_guide.ps.Z ----------------- A compressed version of the above design guide. ref_address.txt ref_controllers.txt ref_cpu.txt ref_interrupts.txt ref_memory.txt -------------------- Reference information which may be useful for developers. To be read in conjunction with the Design Guide. fwupdate.exe ------------ V1.4 firmware update for use with ARC (NT) console . Copy to FAT format floppy disk. Use 'Install New Firmware' option on ARC console menu. Can be used to update to ARC console 4.42 or SRM console X4.3-3114. Minimum memory requirement for operation of fwupdate.exe is now only 16MB. fw_v1_4.image ------------- V1.4 firmware update for use with SRM console (Unix) etc. Note that the SRM console is identical to V1.35 Format a high density floppy from Digital UNIX with command fddisk -fmt /dev/rfd0c Copy file to floppy using command : dd if=pathname/fw_v1_4.image of=/dev/rfd0c bs=256k Boot floppy from SRM console : b dva0 When APU-> prompt appears type : update srm (for SRM console) or update arc When Ready to Program Device ? appears, type : Y Power cycle after 'Rom Update Successful' appears Can be used to update to ARC console 4.42 or SRM console X4.3-3114 Minimum memory requirement for operation of this update utility is 16MB. srom_v05.zip ------------ Zipped copy of HEX file for V0.5 Serial ROM. To be used with suitable ROM programmer to update ROM. Required for 233MHz operation. update.txt ----------- Full instructions for updating firmware. Please e-mail Andrew.Armstrong@ayo.mts.dec.com if you have any problems with these files.