----------------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++ December 2002 + AlphaServer 8200/8400 Firmware + + README-First !!! + ++++++++++++++++++++++++++++++++++++++ 1. Latest Firmware Update Revisions The latest Firmware Update Bootfile "AS8000_V20.EXE" contains the SRM Console V6.4, which has the following components (* = CHANGED since last release): SROM V3.1 VMS PALcode V1.21-1 UNIX PALcode V1.23-1 ISP1020 FW V5.57 AlphaBIOS 5.70c The update bootfile also contains the following I/O Option Firmware Revisions (* = CHANGED since last release) : Option Name Hardware Rev Firmware Rev ----------- ------------ ------------ CIPCA All revs A420 CIXCD All revs 7.0 DEFAA All revs 1.10 DEFPA All revs 3.20 DEMFA All revs 2.1 DEMNA All revs 9.4 KFMSB pre-C02 1.0 KFMSB C02 2.4 KZMSA F and greater 5.6 KZPSA All revs A12 2. Firmware Enhancements and New Features For a complete list of enhancements and new features, consult the AlphaServer 8200/8400 Firmware Release Notes. · Fixed problem with bootp trying to use unsupported block sizes. 3. Firmware Anomalies, Restrictions, and Workarounds For a complete list of firmware anomalies, restrictions, and workarounds, consult the AlphaServer 8200/8400 Firmware Release Notes. · The ECU utility is intermittent when run from the advanced mode of console. The utility will load and appear to function but will exhibit an intermittent hang when attempting to add a new device. Run the utilty from diagnostic mode. Ex. P00>>>set mo diag Console is in diagnostic mode P00>>>configure dev * P00>>>runecu Do NOT attempt to update console firmware to a lower revision than shown below. Installing a revision of firmware below the minimum required will render the CPU module INOPERABLE. In SOME cases, the Loadable Firmware Update utility will not allow the update, if attempted, and would give an error message. o E2056-CA (Single-CPU, 300Mhz) Rev. H and above V2.2-102 o E2056-DA (Dual-CPU, 300Mhz) Rev. P and above V2.2-102 o E2061-CA (Single-CPU, 350Mhz) Rev. A and above V3.0-9 o E2061-DA (Dual-CPU, 350Mhz) Rev. A and above V3.0-9 o E2062-DA (Dual-CPU, 440Mhz) All Rev.'s V4.0-4 o E2065-DA (Dual-CPU, 625Mhz) All Rev.'s T5.1-18 4. AlphaServer 8200/8400 Firmware Release Notes If you wish to read the complete Firmware Release Notes (no longer required for booting the firmware update program) for the AlphaServer 8200/8400, they can be found on the Alpha Systems Firmware Update CD V6.4, in the following directories : On an OpenVMS System: [DOC]ALPHA8200_V20_FW_RELNOTE.PS (PostScript file) On a Digital UNIX System: /DOC/ALPHA8200_V20_FW_RELNOTE.PS (PostScript file) On a Windows NT System: \DOC\ALPHA8200_V20_FW_RELNOTE.PS (PostScript file) --------------------------------------------------------------------------