
Installation Instructions

This document contains two sections:
A: Updating the StorEdge5310 NAS operating system software 
B: Updating the StorEdge5310 NAS RAID controller firmware

----------------------------------------------------------------

A: Updating the StorEdge5310 NAS operating system software 

This procedure is taken from the "System Maintenance" section of the:
Sun StorEdge 5310 NAS Appliance and Gateway Administration Guide


Updating Sun StorEdge 5310 NAS Software:

Start a web browser and connect to your StorEdge 5310, i.e.
  http://10.0.52.10/

Supply the administration password and click "apply".


1: In the navigation panel, select:
    > System Operations > Update Software

2. In the Update Software panel, type the path where the
   update files are located. If you need to look for the
   path, click Browse.  The update file provided with this
   patch is located in the same directory as this file.
   Look for *.IMG

3: Click the Update button and wait for the transfer of
   the system software to StorEdge 5310.

4. When the update process is complete, click Yes to reboot,
   or No to continue without rebooting. The update does not
   take effect until the system is rebooted.

Note that the system restart on the 5310 after this update
takes a few minutes longer than normal.  The additional time
is necessary for completing installation of the new software.

----------------------------------------------------------------

B: Updating the StorEdge5310 NAS RAID controller firmware

This patch package includes new firmware files for the CSM1 NAS RAID controller which were released with NAS 5000 Family OS version 4.12. Please see the included Relese Notes for instructions on how to upgrade your system. 

It is necessary to upgrade your system's FW if you are using 400GB SATA drives or adding new hardware. Only perform this upgrade if you have not already done so with releases 4.10, 4.11 or 4.12.

