Patch-ID# 105202-02
Keywords: NT international NFS sharing solstice 3.1 
Synopsis: Solstice Network Client (SNC) 3.1: NFS file sharing problems with NT 
Date: Sep/11/97

Solaris Release:  

SunOS Release: 

Unbundled Product: Solstice Network Client (SNC)

Unbundled Release: 3.1

Relevant Architectures: i386

BugId's fixed with this patch: 4067100

Changes incorporated in this version: 

Patches accumulated and obsoleted by this patch:  

Patches which conflict with this patch:  

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

 readme.txt
 sunwnfsc.dll

Problem Description: 

4067100 - With international versions of NT, NFS file sharing would not
		work because of some hard coded English strings . This patch
		fixes that problem.

NOTE: This patch is being rev'd only because the original installed the
                patch in the wrong directory. It should go in the system32 
                directory.

 
 Thi patch is packaged as a self-extracting compressed file (10520202.exe).  
 It must be installed from Windows NT.  The setup program backs up the original 
 file(s).  It then installs the new file(s) and a patch uninstall utility. 

 To install, download 10520202.exe to a temporary directory on the PC.  
 
 In Windows NT, select "Run" from the "Start" menu.  Enter the path and 
 patch filename (Example: c:\temp\10520202) then select "OK".  

 The patch will uncompress and start the setup program automatically.  
 Follow the setup program prompts to complete the patch installation.  

 Restart NT.


Patch Removal Instructions:

 In Windows NT, click "Start".  Then select "Programs", "Patch 10520202"
 and click on "uninstallSHIELD".  

 WARNING - The patch uninstall program restarts Windows at the end
           of the uninstall process.
 

Installation Notes:

 All drive letter and directory name references are Solstice Network Client
 defaults. If you have installed Solstice Network Client or the patch file on 
 a different drive, or in a different directory, substitute your 
 drive and directory names in the example commands above.
