Patch-ID# 102710-01
Keywords: PC-NFSpro FTP IBM mainframe Autodetect
Synopsis: PC-NFSpro 1.1.1: therefore unable to correctly display files and directories.
Date: Aug/03/95

Solaris Release: 

SunOS Release: 

Unbundled Product: PC-NFSpro

Unbundled Release: 1.1.1   

Relevant Architectures: i386
	NOTE: PC Windows

BugId's fixed with this patch:  1986206

Changes incorporated in this version: 1986206

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 102467
	NOTE: Patch #102467-02

Obsoleted by: 

Files included with this patch: 

NFSWFTP.EXE
NFSWUV.DLL

Problem Description: 

1986206 - Unable to automatically detect IBM mainframes; therefore unable
	  to correctly display files and directories.

Patch Installation Instructions: 
-------------------------------- 

   NOTE: Apply this patch to PC-NFSpro version 1.1.1.0 only. In order
         to upgrade an installation of PC-NFSpro 1.1 to version 1.1.1.0
         Patch #102467-02 must be installed.

   This patch consists of two files:  NFSWFTP.EXE and NFSWUV.DLL.
   On the system where PC-NFSpro is installed exit Windows. Save the 
   existing NFSWFTP.EXE file and replace it with the new NFSWFTP.EXE
   file. Also install the NFSWUV.DLL file to the same directory.
 
   Select the drive where PC-NFSpro is installed.
 
	C:
 
   Save the original NFSWFTP.EXE file.
 
	COPY C:\PCNFSPRO\BIN\NFSWFTP.EXE C:\PCNFSPRO\BIN\NFSWFTP.FCS

   Install the new NFSWFTP.EXE into the PC-NFSpro directory.

	COPY C:\TMP\NFSWFTP.EXE C:\PCNFSPRO\BIN\NFSWFTP.EXE

   Install the NFSWUV.DLL file into the PC-NFSpro directory.

	COPY C:\TMP\NFSWUV.DLL C:\PCNFSPRO\BIN\NFSWUV.DLL


   All drive letter and directory name references are PC-NFSpro defaults.
   If you have installed PC-NFSpro or the patch file on a different drive
   or in a different directory substitute your drive and directory names
   in the example commands.


Operational Notes:
------------------

  This updated version of the NFSWFTP.EXE application supports either
  Automatic Detection or manual selection of the FTP server.  Once the
  application is started, press the "connect" button.  In the upper 
  right-hand corner of the resulting dialog box the "System Type" can
  be selected.  Before connecting to the server select either 
  "AutoDetect", or the system type you plan to FTP files to/from.



